AEM 30-2011 - AEM Sensors, Connectors & Accessories

AEM#017-30-2011

Water & Coolant Temperature Sensor Kit

3/8"-18 NPT

Includes: Water/Coolant Temp Sensor, 3/8" NPT Aluminum Bung, Connector & Pins

Accessories

Installation Instructions for AEM 30-2011 - AEM Sensors, Connectors & Accessories

Complete list of AEM Sensors, Connectors & Accessories

Details
Overview
Accessories

AEM 30-2011 - AEM Sensors, Connectors & Accessories Details

Temperature Sensor Kits

Sensor Performance Specifications:

Accuracy: < 2°C / 3.6°F

Operating Temp: -40C to 135C / -40F to 275F

Resistive Range (?): See Table

Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.

Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.

Sensor Body Material: Brass

Thread: 3/8"-18 NPT

Hex Size: 3/4"

Installation Torque: 20Nm / 15 ft-lbs

Weight: 39.5g

Supply Current: 5Vdc

Elec. Termination: Weatherproof connector. Includes mating Connector & Pins

AEM offers several sensors and plug & pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a mating connector and pins for ease of installation.