BMR Fabrication TCA027H - BMR Fabrication Rear Control Arms
BMR Fabrication#142-TCA027HRear Lower Control Arms |
||||
|
|
||||
BMR Fabrication TCA027H - BMR Fabrication Rear Control Arms Details
General Motors
Stabilize the caster settings and minimize wheel hop in your 5th Gen Camaro and Pontiac G8 with a set of Trailing Arms from BMR Fabrication. Superior to the factory stamped steel arms, these Trailing Arms are constructed from 1" x 2" rectangular steel and 3/16" CNC laser cut steel plates. The BMR Trailing Arms (TCA027) utilize low friction, Teflon-lined spherical bearings to eliminate bind. Factory trailing arms can cause wheel hop, inconsistent handling, and decreased braking ability under load. Installation time is only 3-4 hours.
Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. BMR's Rear Control Arms fix these common issues while eliminating wheelhop and improve traction. Available in black hammertone or red powdercoat.
Control Arm Relocation Brackets
Relocate your control arm rear mounting points and improve your cars instant center. These bolt on or weld-in relocation brackets allow up to 3 different height (2" 3" 4" drop over stock) adjustments for your lower rear control arm mount. Depending on the ride height of the vehicle the increased control arm angle provides better weight transfer and increases 60 ft/times. Unlike other G-Body traction devices, these will work with all OE and aftermarket rear ends.
