All components carefully matched for oustanding cooling and fitment

Be Cool's Power Cooling Module Assemblies take the guesswork out of properly cooling your vehicle. Each component has been carefully matched for peak efficiency and to fit in the space available. Be Cool builds module assemblies that bolt-in easily and properly cool vehicles with engine horsepower outputs from 350 to 1000. In fact, Be Cool guarantees a minimum 20-degree coolant temperature drop. Each natural finished Be Cool Module System includes a genuine Be Cool crossflow aluminum radiator, a high-torque, european style electric fan, electric fan mounting brackets, and a billet Be Cool radiator cap (exc. P/N's 134-89009/89200/89010/89100). Manual transmission applications DO NOT include a built-in transmission cooler, Automatic transmission applications DO include a built-in transmission cooler.

Best Performance & Value

Performance Grade Dual One Inch Core

Epoxy Free Construction

Billet Filler Neck with High Capacity Over Flow Tube

Popular Sizes for Today's Applications

Hand Fabricated Tanks

Direct Fit Applications

Down Flows and Cross Flows

Cross Flow Conversions

Provisions for Flange, Cradle, Pin and Foot Mounting

Heavy Duty Automatic Transmission Coolers with Fittings

Internal Engine Oil Coolers

Extreme Show Polished Models

OEM Compatible Fittings & Fan Brackets, Included

OEM Size Inlets & Outlets

OEM Style Petcock

100% Pressure Tested

Durable Packaging

Made in North America

Fitment Codes

A: Automatic transmission installation requires (2) of p/n 134-72001

B: No Blower: 350 Maximum horsepower

C: Upper & lower hose and transmission line modification necessary to use crossflow upgrade

D: With passanger-side water pump outlet

E: With driver-side water pump outlet

F: Modification required to bottum of core support

G: Replaces 28-1/2'' core

H: Uses (4) of p/n 134-72003 to install stock shroud

I: Some applications require p/n 134-72011 fitting

J: (1) of p/n 134-72000 needed for installation

K: Requires drilling one 5/8'' hole in top of each subframe rail for pin or foot mounted radiator installation. Battery relocation may also be required

L: (1) p/n 134-72006 & (1) p/n 134-72007 needed for installation

M: Shroud modification necessary

N: Uses 66-67 big block radiator hoses

O: Replaces 34'' core

P: 2001 & 2002 automatic transmission applications require (2) of p/n 134-72002

Q: 66-67 Oldsmoblie may require top plate modification

R: Requires voltage regulator relocation.

S: Except diesel

T: Replaces 26'' downflow

U: Use (2) of p/n 134-72030 to install in 22'' core support

V: Use 69-76 upper hose

W: Must use short water pump

X: For standard shift 4+3 Corvette use p/n 134-62031

Y: Some applications require p/n 134-72010 fitting.

Z: 1992-99 Chevrolet & GMC radiator without raised filler neck requires upper brackets: GM p/n 15574275(R) & 15574276(L)

AA: On all Mopar applications with the XL size core, the transmission cooler is on the same side as the lower radiator hose and it faces outward toward the fender

SB: Small Block

BB: Big Block