1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Brodix 1010001S

Race-Rite 180 Series Cylinder Heads 180cc Intake Ports

Brodix 1010001S

158-1010001S

jegs shipping
FREE Shipping
Ships 12/13/16 if Ordered Today
Brodix 1010001S Race-Rite 180 Series Cylinder Heads 180cc Intake Ports $1,087.66
Race-Rite 180 Series Cylinder Heads
  • 180cc Intake Ports
  • 67cc Combustion Chambers
  • 2.020'' Intake / 1.600'' Exhaust Valve Sizes
  • Straight Plug
  • Bare, 2/pkg.

  • Brodix 1010001S Details

    Race-Rite 180 Series Cylinder Heads

  • 2.020'' Intake / 1.600'' Exhaust Valves
  • 67cc Combustion Chambers
  • This head is sold as an unassembled bare casting. It is finished machined and includes valve guides and valve seats installed. This head does NOT include studs, valves, springs retainers or locks.

    Cylinder Head Specifications
  • Intake Port Volume: 180cc
  • Combustion Chamber Volume: 67cc
  • Valve Sizes: 2.020'' Intake / 1.600'' Exhaust ( 11/32'' Stem Diameter )
  • Spark Plug Configuration: Straight

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Fel-Pro p/n 375-1204, Cometic p/n C5416
  • Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
  • Exhaust Gasket: Fel-Pro p/n 375-1404 or Cometic p/n 245-C5417
  • Head Bolts: ARP p/n 070-134-3601 or Manley p/n 660-42313
  • Head Bolt Washers: MANLEY p/n 660-42102
  • Head Studs: ARP p/n 070-134-4001 (6-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 23°
  • Angle Milling: .0078'' per cc
  • Flat Milling: .0060'' per cc
  • Pushrod Slots: Standard
  • Stud Girdle: Standard
  • Rocker Arms: Standard
  • Lifters: Standard
  • Exhaust Pattern: Standard
  • Valve Centerline: Standard
  • Spring Pockets: May not be cut any larger or deeper than 1.550''
  • Accessory Bolt Holes are Drilled

  • Specifications:

    Manufacturer's Part Number:
    1010001S

    Top Selling, Bolt-On Performance Head!
    23° Intake & Exhaust Valve Angles

    The Brodix Race-Rite 23-degree Small Block Chevy Aluminum Cylinder Heads are designed by Brodix for maximum out-of-the-box horsepower. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as 100% CNC machining and heat treating to assure that you receive the best products for your hard-earned money. Solid, phosphorous bronze guides are used to reduce valve leakage and oil consumption. The ductile iron valve seats are installed for use with unleaded fuel. Race-Rite heads are also milled and drilled on the ends for accessory mounts. The dual valve cover bolt pattern allows you to use either the traditional perimeter-style bolt pattern valve cover or the late-model center bolt pattern valve cover. Sold in Pairs. Made in the USA!

      VALVE SPRING   Specs
      1.250'' Diameter Valve Spring for Hydraulic Flat Tappet Cam
  • Spring Pressure Open: 300 lbs.
  • Spring Pressure Closed: 100 lbs.
  • Installed Height: 1.850''
  • Max Lift: .525''
  •   1.470'' Diameter Valve Spring for Hydraulic Roller Lifter Cam
  • Spring Pressure Open: 325 lbs.
  • Spring Pressure Closed: 125 lbs.
  • Installed Height: 1.900''
  • Max Lift: .575''
  •   1.550'' Diameter Valve Spring for Mechanical Flat Tappet Cam
  • Spring Pressure Open: 400 lbs.
  • Spring Pressure Closed: 140 lbs.
  • Installed Height: 1.950''
  • Max Lift: .600''
  •   1.550'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''

  • Part numbers ending with
    the letter "A" = Angled Spark Plug

    Part numbers ending with
    the letter "S" = Straight Spark Plug

    Items You Need