Items You Need
Ratings |
---|
Price |
Brand |
BP IK 180 Series Cylinder Heads
Brodix IK Series 1021004 Aluminum Cylinder Heads Specifications:
- Intake Port Volume: 180 cc
- Combustion Chamber Volume: 64 cc
- Valves: 2.020 in. dia. x 4.920 in. o.a.l. Intake/1.600 in. dia. x 4.920 in. o.a.l. Exhaust (11/32 in. Stem Diameter)
- Valve Springs:
- 1.250 in. Diameter
- Open Pressure: 300 lbs.
- Closed Pressure: 100 lbs.
- Installed Height: 1.850 in.
- Max Lift: .525 in.
- Spring Retainers: 1.250 in. 7° Steel
- Rocker Studs: 3/8 in.
- Guide Plates: 5/16 in.
- Valve Seals: 11/32 in.
- Torque Heads: 70 ft-lb.
- Torque Rocker Studs: 40-45 ft-lb.
- Spark Plug Specs: 14mm Thread, .750 in. (3/4 in.) Reach, Gasket Seat
- Spark Plug Configuration: Straight
- Valve Angle: 23°
- Angle Milling: .0078 in. per cc
- Flat Milling: .0060 in. per cc
- Pushrod Slots: Standard
- Stud Girdle: Standard
- Rocker Arms: Standard
- Lifters: Standard
- Exhaust Pattern: Standard
- Valve Centerline: Standard
- Spring Pockets: May not be cut any larger or deeper than 1.550 in.
- Accessory Bolt Holes are Drilled
Brodix IK Series 1021004 Aluminum Cylinder Heads Related Components (each sold separately):
- Intake Gasket: Fel-Pro 1204 or Cometic C5416
- Head Gasket: Fel-Pro 1003 (350 ci.) 1004 (400 ci.) or Cometic C5399 (350 ci.) C5403 (400 ci.)
- Exhaust Gasket: Fel-Pro 1404 or Cometic C5415
- Head Bolts: ARP 134-3601 or Manley 42313
- Head Bolt Washers: MANLEY 42102
- Head Studs: ARP 134-4001 (6-point)
- Recommended Intake Manifold: Brodix HP-1 or HV 1016
FAQ
How do you tell what Brodix heads I have?
- Look for casting numbers or logos on the cylinder heads
- Check the Brodix website using the part number (1021004) for specifics
- Contact Brodix directly for identification assistance
What degree are Brodix Track 1 heads?
- Brodix Track 1 heads are available in both 23 and 18-degree configurations
- The specific degree depends on the variant of the heads
What is the flow number of the Brodix spec heads?
- Flow numbers for Brodix spec heads vary based on intake and exhaust valve sizes
- Refer to Brodix documentation or contact for detailed flow number information
What is the flow number of the Brodix bb2 Xtra heads?
- Brodix BB2 Xtra heads have varying flow numbers depending on valve sizes and configurations
- Consult Brodix specifications or reach out for precise flow number details
Specifications:
What is the warranty for these Brodix heads?
What type lifters are needed for these heads.
Will the valve springs work with a 500/510 lift roller cam?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.