Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
Shop By Vehicle
Shop By
All Categories

Gift Certificates
My Account
E-Mail Signup
Catalog Request

Brodix 1160000

DR 1213 Series Cylinder Heads 315cc Intake Ports

Brodix 1160000

Part Number: 158-1160000

DR 1213 Series Cylinder Heads
  • 315cc Intake Ports
  • 49cc Combustion Chambers
  • 2.230'' Intake / 1.580'' Exhaust Valve Sizes
  • Angle Plug
  • Bare, 2/pkg.
  • $2,292.50
    Ships 11/01/16
    if Ordered Today
    FREE Shipping
    Brodix 1160000 DR 1213 Series Cylinder Heads 315cc Intake Ports $2,292.50

    Brodix 1160000 Details

    DR 1213 Series Cylinder Heads

  • 49cc Combustion Chambers
  • This head is sold as an unassembled bare casting. It is finished machined and includes valve guides and valve seats installed. This head does NOT include studs, valves, springs retainers or locks.

    Cylinder Head Specifications
  • Intake Port Volume: 315cc
  • Combustion Chamber Volume: 49cc
  • Valve Sizes: 2.230'' Intake / 1.580'' Exhaust ( 11/32'' Stem Diameter )
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Brodix p/n 158-MG2200 or Cometic p/n 245-C5423
  • Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
  • Exhaust Gasket: Brodix p/n 158-MG52464 (Trim to fit), Cometic p/n 245-C5422 (Spread Port)
  • Head Studs: Available from Brodix
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 13.5°
  • Angle Milling: N/A
  • Flat Milling: .0060'' per cc
  • Pushrod Slots: Left Bare and Uncut
  • Stud Girdle: N/A
  • Rocker Arms: Shaft System with 95/150 Spacing - T&D 22221, Jesel KPS 411164
  • Lifters: .180'' Offset
  • Pistons: Special 13.5° with -12 spark plug angle
  • Pushrods: Special Length
  • Intake Face Angle: 5°
  • Exhaust Pattern: Spread Port with Stahl Bolt Pattern Header Flange
  • Valve Centerline: 95/150
  • Spring Pockets: 1.550'' Out of the Box, May be cut to 1.625'' - No larger or deeper
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Fuel Injection

  • Specifications:

    Manufacturer's Part Number:

    Highest Intake Port Location in the Industry
    DR 1213 - 12.5° Intake & 13.5° Exhaust Valve Angles
    GB 2000 - 13.5° Intake & Exhaust Valve Angles

    The Brodix GB Series is in a class by itself. These 13.5° valve angle heads were designed with sprint cars, late models, and drag racing in mind. The GB 2000 series features improved spark plug angles, highly efficient combustion chambers, raised intake ports, moved valve centerlines, and a raised valve cover rail. The latest evolution of the GB head is the DR 1213 which features a 13.5° exhaust valve angle and a 12.5° intake valve angle for even greater air flow. Special components required for the GB 2000 series and DR heads are injectors or modified intake manifold, sheet metal valve covers, and a shaft rocker system. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. The industry standard has been taken to the next level with modernized CNC porting. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and interlocking valve seats installed. Bare heads sold in pairs, Assembled heads sold individually. Made in the USA!

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  •   1.550'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 600 lbs.
  • Spring Pressure Closed: 260 lbs.
  • Installed Height: 1.950''
  • Max Lift: .800''
  • Items You Need