1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Brodix 2050000

BB-5 Series Cylinder Head 387cc Rectangle Intake Ports

Brodix 2050000

158-2050000

jegs shipping
FREE Shipping
Ships 12/13/16 if Ordered Today
Brodix 2050000 BB-5 Series Cylinder Head 387cc Rectangle Intake Ports $1,207.59
BB-5 Series Cylinder Head
  • 387cc Rectangle Intake Ports
  • 119cc Combustion Chambers
  • 2.350'' Intake / 1.880'' Exhaust Valve Sizes
  • Bare, 1/pkg.

  • Brodix 2050000 Details

    BB-5 Series Cylinder Heads

  • 387cc Intake Port Volume
  • Unassembled, Bare Head
  • This head is sold as an unassembled bare casting. It is finished machined and includes valve guides and valve seats installed. This head does NOT include rocker studs, valves, springs, retainers or locks.

    Cylinder Head Specifications
  • Intake Port Volume: 390cc - Rectangle Port
  • Combustion Chamber Volume: 119cc
  • Valve Sizes: 2.350'' Intake / 1.880'' Exhaust ( 11/32'' Stem Diameter )
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Brodix p/n 158-MG2001, Cometic 245-C5428, Fel-Pro 375-1252-3
  • Head Gasket: 4.540'' Bore - Fel-Pro p/n 375-1017, Cometic p/n 245-C5433; 4.600'' Bore - Fel-Pro p/n 375-1057, Cometic p/n 245-C5434
  • Exhaust Gasket: Fel-Pro p/n 375-1411 or Cometic p/n 245-C5429
  • Head Bolts: ARP p/n 070-135-3606, Manley p/n 660-42192
  • Head Studs: ARP p/n 070-235-4702 (12-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 24° and 4° Intake, 15° and 4° Exhaust
  • Angle Milling: .0066'' per cc
  • Flat Milling: .0050'' per cc
  • Pushrod Slots: Standard
  • Pushrods: Check pushrod clearance with head installed on the engine block before final assembly
  • Stud Girdle: Standard
  • Rocker Arms: Standard
  • Lifters: Standard
  • Pistons: 2° Valve Rolled Piston
  • Valve Centerline: Standard
  • Exhaust Pattern: Raised .600''
  • Spring Pockets: May not be cut any larger or deeper than 1.625''
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Brodix SA 2012 (p/n 158-SA2012) / SA 2020 (p/n 158-SA2020)

  • Specifications:

    Manufacturer's Part Number:
    2050000

    Raised Intake and Exhaust Port Design!
    24°/4° Intake & 15°/4° Exhaust Valve Angles

    The Brodix BB-4 XTRA and BB-5 valve angles have been rolled 2-degrees from stock to produce more torque and less chamber volume. The BB-4 XTRA and BB-5 have a raised, rectangle-shaped intake port design (approximately .400'') allowing the short-turn radius a better air flow angle without sacrificing velocity. Others offer a similar version of these heads, but they have larger intake ports in the stock location. The competitor's low profile head slows down the air speed making the engine extremely lazy. The BB-4 XTRA heads are 100% CNC ported intake/exhaust ports, combustion chambers and fully blended bowls that flow an amazing 447 cfm and raised exhaust ports that flow 276 cfm with a 1.900'' exhaust valve.
    When Sonny Leonard designed the BB-5 cylinder head for larger cubic inch engines, he incorporated the most important things: correct port shape, volume, and velocity. The BB-5 have CNC'd intake port match, fully blended bowls and valve job. The intake/exhaust ports and combustion chambers remain as-cast. If you want to take the next step up from a standard 26/4 and 17/4 valve angle cylinder head, the Brodix BB-4 XTRA or BB-5 is the ticket! Standard features include an extra thick deck, high valve cover rail, and the best castings in the business.
    Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. Sold Individually, 1/pkg. Made in the USA!

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Flat Tappet & Hydraulic Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  •   1.625'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 745 lbs.
  • Spring Pressure Closed: 255 lbs.
  • Installed Height: 2.050''
  • Max Lift: .800''
  •   1.645'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 945 lbs.
  • Spring Pressure Closed: 330 lbs.
  • Installed Height: 2.100''
  • Max Lift: .875''
  • Items You Need