FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Brodix 2180001 - Brodix Big Block Chevy BB-3 XTRA Series Aluminum Cylinder Heads

Brodix 2180001 - Brodix Big Block Chevy BB-3 XTRA Series Aluminum Cylinder Heads

Brodix#158-2180001

Big Duke PB 1802 Series Cylinder Head
  • 456cc Rectangle Intake Ports
  • 91cc Combustion Chambers
  • 2.400'' Intake / 1.900'' Exhaust Valve Sizes
  • Bare, 1/pkg.

    Brodix 2180001 - Brodix Big Block Chevy BB-3 XTRA Series Aluminum Cylinder Heads Details

    PB 1802 Series Cylinder Heads

  • 456cc Intake Port Volume
  • Unassembled, Bare Head
  • This head is sold as an unassembled bare casting. It is finished machined and includes valve guides and valve seats installed. This head does NOT include rocker studs, valves, springs, retainers or locks.

    Cylinder Head Specifications
  • Intake Port Volume: 456cc - Rectangle Port
  • Combustion Chamber Volume: 91cc
  • Valve Sizes: 2.400'' Intake / 1.900'' Exhaust ( 11/32'' Stem Diameter )
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Cometic 245-C5419, Fel-Pro 375-1298
  • Head Gasket: 4.540'' Bore - Fel-Pro p/n 375-1017, Cometic p/n 245-C5433; 4.600'' Bore - Fel-Pro p/n 375-1057, Cometic p/n 245-C5434
  • Exhaust Gasket: Fel-Pro p/n 375-1412 or Cometic p/n 245-C5418
  • Head Studs: ARP p/n 070-235-4712 (12-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 18° and 4° Intake, 9° and 4° Exhaust
  • Angle Milling: N/A
  • Flat Milling: .0055'' per cc
  • Pushrod Slots: Standard
  • Pushrods: Check pushrod clearance with head installed on the engine block before final assembly
  • Rocker Arms: Shaft Mounted System - T&D 3036, Jesel KPS 22797
  • Lifters: Standard
  • Pistons: 18° x 9° Valve Piston
  • Spring Pockets: May not be cut any larger or deeper than 1.750''
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Brodix PM 1800 (p/n 158-PM1800) / PM 1810 (p/n 158-PM1810)

  • Brodix 2180001 - Brodix Big Block Chevy BB-3 XTRA Series Aluminum Cylinder Heads

    Innovatie Design and Performance That Accepts Most Standard BB-Chevy Components!
    24°/4° Intake & 15°/4° Exhaust Valve Angles

    Brodix built the BB-3 XTRA Series to take the conventional big block to the next level. These cylinder heads feature a valve angle that is rolled two-degrees. The BB-3 XTRA Series is available in a Rectangular-shaped or Oval-shaped intake port configuration, and both are offered in an out-of-the box version or completely CNC ported. The out-of-the-box versions features a CNC'd intake port match and bowls are blended while the intake ports, exhaust ports and combustion chambers remain as casted.
    The Rectangle Port BB-3 XTRA 345 series and BB-3 XTRA 363 series, both with CNC ported 119cc combustion chambers, CNC bowls blended and ports matched, easily flow over 390 cfm. The Rectangular Port BP BB-3 XTRA series are 100% CNC ported and available in two port volumes, 366cc and 380cc. The 380cc version flows over 440 cfm.
    The Oval Port BP BB-3 XTRA O series are also 100% CNC ported and available in three port volumes: 332cc, 351cc, and 365cc. This wide range of port volumes allows the oval port to compliment virtually any engine combination available. Port shape, port velocity, and the latest technology have propelled these cylinder heads to the top of their class.
    While creating the 100% CNC Ported BP series BB-3 XTRA, the professionals at Brodix invested many long hours on the flow bench and at the track developing a completely ported cylinder head. The bottom line is that Brodix builds you the most accurate, best flowing out-of-the-box cylinder heads available at the best price. These cylinder heads accept standard BB-Chevy intake manifolds, and rocker arms. The exhaust ports are raised .600'' higher than stock (check all clearances for off the shelf headers). Valve cover rails are now raised to assure no oil leakage. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. Sold Individually, 1/pkg. Made in the USA!

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Flat Tappet & Hydraulic Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  •   1.625'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 745 lbs.
  • Spring Pressure Closed: 255 lbs.
  • Installed Height: 2.050''
  • Max Lift: .800''
  •   1.645'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 945 lbs.
  • Spring Pressure Closed: 330 lbs.
  • Installed Height: 2.100''
  • Max Lift: .875''
  • JEGS Performance Products 80521 - JEGS Premium Stud Mount Valve Spring Compressor Tool
    Only $44.99

    JEGS Performance Products 80524 - JEGS Top Dead Center Locator
    Only $7.99

    JEGS Performance Products 80518 - JEGS Stud Mount Valve Spring Compressor Tool
    Only $21.99

    JEGS Performance Products 80900 - JEGS Port and Polish Kit
    Only $32.99


    See All Items You Need