FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

COMP Cams 08-605-44 - Comp Cams 4-Pattern Camshafts

COMP Cams 08-605-44 - Comp Cams 4-Pattern Camshafts

COMP Cams#249-08-605-44

4-Pattern O.E. Hydraulic Roller Camshaft
Small Block Chevy 262-400ci 1955-98
Intake Lift: .622"/.619"
Exhaust Lift: .610"/.606"
Lobe Separation Angle: 108.5°/107.5°
RPM Range: 2300-6600

COMP Cams 08-605-44 - Comp Cams 4-Pattern Camshafts Details

Small Block Chevy 262-400ci 1955-98

Intake Duration: 283°/281°
Exhaust Duration: 295°/293°

Great all around choice for street applications in modified engines and 2500+ stall or manual transmissions.

COMP Cams 08-605-44 - Comp Cams 4-Pattern Camshafts

Comp Cams 4-Pattern Camshafts are hydraulic rollers designed to optimize valve events based on runner length and feature a large increase in both area under the curve and stability at high RPM

To make the most power from your engine, you need to optimize the air ingested and captured by avoiding valves closing too soon or too late. Any conventional center layout single throttle body or carbureted V8 intake manifold features longer outboard runners and shorter inboard runners, meaning that each valve event should occur at a different moment.

COMP Cams 4-Pattern Camshafts are the very first series of cams designed to accommodate this difference in length and avoid valves closing at the wrong times. NASCAR teams have been using camshafts designed this way for years, and using lessons learned along with them, COMP Cams has designed a series of cams that optimizes valve events and features a large increase in both area under the curve and stability at high RPM.

The camshafts feature four different lobe patterns with one intake and exhaust design for outboard runners, and another intake and exhaust design for the inboard runners. While the four inboard cylinders are all the same grinds, the outboard exhaust openings are two degrees earlier, with outboard intake closings coming two degrees later. This is the first ever use of technology in street vehicles to balance air/fuel ratio per cylinder and can net you a possible 1000+ RPM over other hydraulic rollers and anywhere from 5-20+ horsepower peak to peak, depending on cylinder head flow.

The 4-Pattern hydraulic roller cams are CNC-Machined from steel billet cores with cast iron distributor drive gears. The cams also feature a tight lobe separation for both excellent performance and a throaty sound.

Note: Upgraded valve train components and aftermarket cylinder heads required.

JEGS Performance Products 210065 - JEGS Timing Cover Gasket Sets
Only $11.99

JEGS Performance Products 1126 - JEGS Heavy-Duty Nitrile Gloves
Only $13.99

JEGS Performance Products 1127 - JEGS Heavy-Duty Nitrile Gloves
Only $12.99

JEGS Performance Products 1128 - JEGS Heavy-Duty Nitrile Gloves
Only $13.99


See All Items You Need