Comp Cams CL12-235-2 - Comp Cams 'Xtreme 4x4' Hydraulic Flat Tappet Camshafts
Comp Cams #249-CL12-235-2Xtreme 4x4 X4254H Hydraulic Flat Tappet Camshaft & Lifter KitLift: .447''/.462'' Duration: 254°/262° RPM Range: 1000-5200 |
||||
|
|
||||
|
|
||||
Comp Cams CL12-235-2 - Comp Cams 'Xtreme 4x4' Hydraulic Flat Tappet Camshafts Details
Chevy 262-400ci Small Block 1955-98
*Note: In order to use these camshafts in 1955-57 265ci blocks, it is necessary to machine a small groove in the rear main journal of the cam to allow oil flow to the top of the engine.
Strong low-end and mid-range torque, good idle.
Operating Range: 1000-5200 RPM Duration Advertised: 254° Intake / 262° Exhaust Duration @ .050'' Lift: 210° Intake / 218° Exhaust Valve Lift w/1.5 Rockers: .447'' Intake / .462'' Exhaust Lobe Separation Angle: 111°
Big Torque Cams! Four wheel drive engines have special needs and requirements that most street performance camshafts just can't properly statisfy. Comp Cams Xtreme 4x4 cams produce tremendous off-idle torque and throttle response as well as big torque throughout the entire operating range without sacrificing necessary vacuum. We do not recommend the use of stock valve train components with these camshafts due to the aggressive lobe designs.
Camshaft & Lifter Kits are indicated by a CL in their part number and include Camshaft and Lifters.
Complete Kits are indicated by a K in their part number and include Camshaft, Lifters, Timing Chain & Gears, Valve Springs, Spring Retainers, Spring Locks and Valve Springs.
Small Kits are indicated by a SK in their part number and include Camshaft, Lifters, Timing Chain Set, Assembly Lube, Decals, and Instructions.
