Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

COMP Cams SK10-211-4 - Comp Cams 'Magnum' Hydraulic Flat Tappet Camshafts



COMP Cams SK10-211-4 - Comp Cams 'Magnum' Hydraulic Flat Tappet Camshafts
COMP Cams SK10-211-4 - Comp Cams 'Magnum' Hydraulic Flat Tappet Camshafts

JEGS Part Number: 249-SK10-211-4

Magnum 305H Hydraulic Flat Tappet Camshaft Small Kit
Lift: .541''/.541"
Duration: 305°/305°
RPM Range: 3000-7000

COMP Cams SK10-211-4 Details

American Motors 290-401ci 1966-1991

  • Excellent for Pro Street or mild bracket racing
  • 3500+ stall, 10.5:1 compression, 4.10 gear or lower
  • Radical idle

    Installation note: Stock springs cannot be used.

  • Comp Cams 'Magnum' Hydraulic Flat Tappet Camshafts

    Comp Cams Magnum Camshafts are very aggressive and specifically designed for the street enthusiast looking for more power with that Pro Street sound. Intended for performance oriented vehicles that will see little street use. The idle characteristics of your engine will change due to the increased duration and overlap of the Magnum Cam Series. You will notice a racey idle with the 280-grind while the 292 and 305-grinds will produce a rough or ''rumbly'' idle. Stock components are generally incompatible. Changes are needed in rear end gear ratios, headers and the torque converter. Magnum Cams will affect your power accessories to a certain extent. The 280 and 292-grinds are the biggest cams that should be used with power assisted brakes, air conditioning, etc. You should remember that the bigger the engine is, the less the cam will affect the vacuum which affects your power accessories. The smaller your engine is, the more the Magnum Camshaft will affect your power accessories. Most late model vehicles have a vacuum canister. If your vehicle does not have a vacuum canister, it may be necessary to add one.

    Features:
  • Great high RPM power
  • Easy on valve train parts
  • Can be used with mild ratio rocker arms and traditional performance valve springs
  • Best with aftermarket converter and 9.5:1+ compression

    268H Series
    Good street performance with stock converter, choppy idle.

    270H Series
    Great for high performance driving in street machines. The 270H has a rough idle in small blocks and a noticeable idle in big blocks. This is the largest cam that can be used with a stock torque converter. The 270H should not affect power accessories, but should be used with headers and 4bbl carburetor.

    280H Series
    Best for serious street machines. This cam has a definite rough idle and will sometimes affect power accessories. It can be driven extensively on the street or raced on the weekends. The 280H needs an aftermarket converter, intake manifold and headers.

    286H Series
    Designed to fill in the gap between teh 280H and 292H. For serious street machines and bracket racers. With a rough idle and lower vacuum signal, this is not an average street cam. At least a 2500-RPM converter must be used, but a 3000 is recommended.

    292H Series
    This cam is for the serious street/strip type car. An aftermarket torque converter should be used as well as headers, intake and increased compression. The 292H has a radical, rough idle.

    305H Series
    The 305H should really be considered for Pro-Street type cars where actual streetability is not a major concern. The design of this cam also makes it ideal for all bracket racing engines. Major engine modifications are needed as well as transmission and driveline improvements. The 305H works best in large cubic inch engines and has a radical idle. This is the only hydraulic cam in the series that does not have an advance made into it and will need to be degreed in.

    Camshaft & Lifter Kits are indicated by a CL in their part number and include Camshaft, Lifters, Assembly Lube, Decals, and Instructions.

    Complete Kits are indicated by a K in their part number and include Camshaft, Lifters, Timing Chain & Gears, Valve Springs, Retainers, Locks, Assembly Lube, Decals, and Instructions.

    Small Kits are indicated by a SK in their part number and include Camshaft, Lifters, Timing Chain Set, Assembly Lube, Decals, and Instructions.

  • COMP Cams SK10-211-4

    Exhaust Valve Lift (in.)
    0.541
    Intake Valve Lift (in.)
    0.541
    Exh. Duration @ .050 in. (Deg)
    253
    Int. Duration @ .050 in. (Deg)
    253
    RPM Range
    3000-7000
    Exh. Duration Advertised (Deg)
    305
    Int. Duration Advertised (Deg)
    305
    Engine Make/Size
    AMC 290-401
    Lifter Type
    Hydraulic Flat Tappet
    Usage
    Street/Strip
    Gaskets Included
    No
    Advertised Duration
    305 int./305 exh.
    Advertised Exhaust Duration
    305
    Advertised Intake Duration
    305
    Assembly Lubricant Included
    Yes
    Basic Operating RPM Range
    3,000-7,000
    Cam Style
    Hydraulic flat tappet
    Computer-Controlled Compatible
    No
    Duration at 050 inch Lift
    253 int./253 exh.
    Exhaust Duration at 050 inch Lift
    253
    Exhaust Valve Lift with Factory Rocker Arm Ratio (
    0.541
    Grind Number
    305H
    Intake Duration at 050 inch Lift
    253
    Intake Valve Lift with Factory Rocker Arm Ratio (i
    0.541
    Lifter Style
    Hydraulic flat tappet
    Lifters Included
    Yes
    Locks Included
    No
    Pushrods Included
    No
    Quantity
    Sold as a kit
    Retainers Included
    No
    Rocker Arms Included
    No
    Timing Chain and Gears Included
    Yes
    Timing Chain Style
    Double roller
    Valve Lift with Factory Rocker Arm Ratio
    0.541 int./0.541 exh.
    Valve Springs Included
    No
    Valve Springs Required
    Yes
    Valve Stem Seals Included
    No
    Lobe Separation (Deg)
    110
    Manufacturer's Part Number:
    SK10-211-4
    COMP Cams 159 - COMP Cams Engine Break-In Oil Additive
    Only $14.27

    COMP Cams 505-16 - Comp Cams Valve Stem Seals
    Only $27.47

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $4.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $2.69