Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
My Cart
Shop By
All Categories

Gift Certificates
My Account

Crane Cams 730-0892 - Crane Cams HI-6/Digital Multi-Spark CD Ignitions

Crane Cams 730-0892 - Crane Cams HI-6/Digital Multi-Spark CD Ignitions

Part Number: 271-730-0892

LX92 Professional Race Coil
  • For use with Capacitive Discharge Racing System
  • $86.13
    Made In USA

    Crane Cams 730-0892 - Crane Cams HI-6/Digital Multi-Spark CD Ignitions Details

    LX Series Coils

    Professional race coil for use with CD systems only. Gives up to 12 times greater output than OE. Replacement coil for Crane HI-7 system. Can also be used with Mallory Hyfire, MSD7 and MSD8 systems. Caution: MSD6 systems are not capable of driving the high current demanded by the LX92. Not compatible with Crane HI-6S system. CARB E.O. D-225-60 for 1995 and older non-OBD II vehicles with distributor-type CD ignition system.

    The most reliable of its type on the market, Crane Cams HI-6/Digital Multi-Spark CD Ignition is for race and street vehicles. These units deliver higher spark gap current than comparable digital CD ignitions.

  • Multi-spark CD for 4, 6, or 8-cylinder race and street applications with distributor
  • Compatible with nitrous oxide, superchargers, and turbos
  • Up to 14.5:1 compression ratio
  • More horsepower and torque
  • Crisper throttle response
  • Bigger rotary switches with precise click-in detents for easy rev limit adjustments
  • Adjusts in 100 RPM increments
  • No chips needed
  • Sequential rev limiting stops engine damaging popping and banging at rev limit
  • Built-in timing retard available with optional Control Module #271-6000-6425
  • Points, module, mag triggered
  • Fully potted with soft urethane for heat, dirt, and moisture protection
  • Surface-mount, fully digital components
  • The most reliable CD ignition available
  • CARB E.O. #D-225-66

  • Operating Voltage: 6 to 18 volts, reverse polarity protected, negative ground only
  • Current Draw: 7 amps maximum at 10,000 RPM
  • RPM Operating Range: 12,000 RPM (with rev limiter disabled)
  • RPM Limiter Range: 600 to 9,900 RPM in 100 RPM increments
  • RPM Limiter Accuracy: ±30 RPM
  • Timing Accuracy: ±0.5° from 500 to 9,900 RPM
  • Multiple Spark Duration: 20° crankshaft rotation below 3,000 RPM (maximum 12 sparks per sequence with 1 millisecond intervals)
  • Primary Voltage Output: 450 volts
  • Primary Energy Output: 1200 millijoules/sequence
  • Peak Spark Gap Current: 380 milliamps with LX91 coil, 510 milliamps with LX92 coil
  • Dimensions: 8" L x 4-1/2" W x 2" H
  • Weight: 4-1/2 pounds

  • Items You Need
    Items You May Also Consider