Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Crane Cams 113861

Mechanical Flat Tappet Camshaft Lift: .500" /.520"

Crane Cams 113861

271-113861

jegs shipping
FREE Shipping
Estimated ship date 09/29/17 if Ordered Today
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Crane Cams 113861 Mechanical Flat Tappet Camshaft Lift: .500" /.520" $136.65
Mechanical Flat Tappet Camshaft
  • Lift: .500''/.520''
  • Duration: 288°/298°
  • RPM Range: 3800-7200
  • Hot Lash:.022''

  • Crane Cams 113861 Details

    Chevy 262-400ci Small Block 1955-98

    *Note: In order to use these camshafts in 1955-57 265ci blocks, it is necessary to machine a small groove in the rear main journal of the cam to allow oil flow to the top of the engine.

    **Note: Beginning in 1987, most of the V-6 and V-8 engines were equipped with hydraulic roller camshafts. There are differences in the block to accommodate a cam retention thrust plate and the anti-rotation mechanism for the lifters. These blocks are identifiable by bolt holes for a cam retention plate under the upper timing sprocket, as well as bosses and tapped holes in the lifter valley for lifter retention hardware. The camshafts on these engines have a step nose and smaller bolt circle on the front of the cam. An earlier model camshaft may be used in these blocks by using the appropriate timing chain set and adding a thrust button when using a roller cam.
    1988-99 Chevrolet 305 and 350 V-8 engines (and some 1987 350 V-8 engines) use a different configuration camshaft core than the 1955-87 engines and cannot be interchanged.

    ***Note: Self-aligning rocker arms cannot be used with mechanical lifter camshafts.

    ROUGH IDLE, MODERATE PERFORMANCE USAGE, GOOD MID-RANGE HP, 3800-4200 CRUISE RPM, 11.0 TO 12.5 COMPRESSION RATIO ADVISED.

    Grind Number: F-288-2 (replaces CC-288-2)
    Operating Range:3800-7200 RPM
    Duration Advertised:288° Intake / 298° Exhaust
    Duration @ .050'' Lift:248° Intake / 258° Exhaust
    Valve Lift w/1.5 Rockers:.500'' Intake / .520'' Exhaust
    Lobe Separation Angle:114°
    Max Lift Angle:109° ATDC Intake / 119° BTDC Exhaust
    Open/Close @.050'' Cam Lift:Intake - 15° BTDC (opens) / 53° ABDC (closes)
    Exhaust - 68° BBDC (opens) / 10° ATDC (closes)

    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List