800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Crane Cams 114112

Crane Cams Hydraulic Flat Tappet Camshafts

Crane Cams 114112

271-114112

jegs shipping
FREE Shipping
Estimated ship date 12/18/17 if Ordered Today
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Crane Cams 114112 Crane Cams Hydraulic Flat Tappet Camshafts $210.59
PowerMax Hydraulic Flat Tappet Camshaft & Lifter Kit
Lift: .401''/.423''
Duration: 254°/264°
RPM Range: 800-4400
C.A.R.B. Approved*

Crane Cams 114112 Details

Small Block Chevy 1981-92

Crane PowerMax emissions legal cams produce amazing increases in torque, horsepower and throttle response while extending the rpm powerband of computer controlled performance passengers cars and light trucks. PowerMax Emissions cams also permit full function of stock engine control computers. Plus, they work great with aftermarket performance chips.

*Note: 50-State Legal. This camshaft has been granted a California Air Resources Board (CARB) exemption (an ''EO'' number), or is a direct or consolidated replacement part. It is 50-state legal, per the manufacturer's application guide.

**Note: For 1981-87 car and 1981-92 truck applications.

***Note: In order to use these camshafts in 1955-57 265ci blocks, it is necessary to machine a small groove in the rear main journal of the cam to allow oil flow to the top of the engine.

****Note: Beginning in 1987, most of the V-6 and V-8 engines were equipped with hydraulic roller camshafts. There are differences in the block to accommodate a cam retention thrust plate and the anti-rotation mechanism for the lifters. These blocks are identifiable by bolt holes for a cam retention plate under the upper timing sprocket, as well as bosses and tapped holes in the lifter valley for lifter retention hardware. The camshafts on these engines have a step nose and smaller bolt circle on the front of the cam. An earlier model camshaft may be used in these blocks by using the appropriate timing chain set and adding a thrust button when using a roller cam.
1988-99 Chevrolet 305 and 350 V-8 engines (and some 1987 350 V-8 engines) use a different configuration camshaft core than the 1955-87 engines and cannot be interchanged.

GREAT FOR 305 AND 350 ENGINES IN CARS, LIGHT AND INTERMEDIATE TRUCKS WITH OPTIONAL GEARING. GOOD LOW AND MID-RANGE TORQUE AND HP. (50 STATE LEGAL IN 1981-87 CAR AND 1981-92 TRUCK, 267-350 APPLICATIONS ONLY. C.A.R.B. E.O. D-225-19)

Grind Number: 2020
Operating Range:800-4000 RPM
Duration Advertised:254° Intake / 264° Exhaust
Duration @ .050'' Lift:194° Intake / 204° Exhaust
Valve Lift w/1.5 Rockers:.401'' Intake / .423'' Exhaust
Lobe Separation Angle:104°
Max Lift Angle:104° ATDC Intake / 104° BTDC Exhaust
Open/Close @.050'' Cam Lift:Intake - (7°) ATDC (opens) / 21° ABDC (closes)
Exhaust - 26° BBDC (opens) / (2°) BTDC (closes)

The most popular OE camshaft type through the late 1980s, hydraulic lifter profiles can provide a power curve that tops out just over 7000 RPM when used with high-performance hydraulic lifters. Also easy to maintain, hydraulic cams range from aggressive (rough idle) to towing (improved bottom-end torque).

Items You Need

Before you leave us... Receive a free catalog or join our email list

Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

Request CatalogJoin Email List