Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Crane Cams 139651

PowerMax Hydraulic Roller Tappet Camshaft Lift: .632" /.632" Duration: 306°/318° RPM Range: 3800-7000

Crane Cams 139651

271-139651

jegs shipping
FREE Shipping
Ships from Manufacturer
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Crane Cams 139651 PowerMax Hydraulic Roller Tappet Camshaft Lift: .632" /.632" Duration: 306°/318° RPM Range: 3800-7000 $458.86
PowerMax Hydraulic Roller Tappet Camshaft
Lift: .632''/.632''
Duration: 306°/318°
RPM Range: 3800-7000

Crane Cams 139651 Details

Chevy 396-454ci Big Block 1965-96

*Note: In order to use these camshafts in 1965-66 396/427ci blocks, it is necessary to machine a 3/16'' wide x 7/64'' deep groove in the rear main journal of the cam to allow oil flow to the top of the engine.

**Note: 1991-95 Gen-V engines can use these camshafts and components if they are converted to adjustable rocker arms by installing p/n 270-99152-16 rocker arm studs (no machining required) and appropriate rocker arms. Custom length pushrods can also be made to achieve correct lifter preload if standard non-adjustable rocker arms are retained.

***Note: Requires cam button spacer, camshaft incorporates an integral cast iron distributor drive gear, aluminum-bronze distributor drive gear not required. For engines equipped with mechanical fuel pump pushrod p/n 270-11985-1 is highly recommended to prevent fuel pump lobe wear. Some 1973 thru 1981 454ci engines were equipped with exhaust valve rotators. In these instances when using dual valve springs, use either our p/n 270-99459-8 spring seat spacers or only 8 of p/n 270-99948-16 (set of 16) valve spring retainers (on the exhaust valves only) to prevent excessive valve spring shimming when eliminating the rotators. Some later engines were equipped with rotators on both the intake and exhaust valves. For these applications when using dual valve springs, use either 2 of p/n 270-99459-8 spring seat spacers or p/n 270-99948-16 valve spring retainers to prevent excessive valve spring shimming when eliminating the rotators.

ROUGH IDLE, PERFORMANCE USAGE, GOOD MID AND UPPER RPM HP, BRACKET RACING, AUTO TRANS W/3500+ CONVERTER, MARINE PERFORMANCE, 3800-4200 CRUISE RPM, FOR 500+ CU. IN. ENGINES, 10.5 TO 12.5 COMPRESSION RATIO ADVISED.

Grind Number: HR-306-2S-14 IG
Operating Range:3800-7200 RPM
Duration Advertised:306° Intake / 318° Exhaust
Duration @ .050'' Lift:244° Intake / 256° Exhaust
Valve Lift w/1.7 Rockers:.632'' Intake / .632'' Exhaust
Lobe Separation Angle:114°
Max Lift Angle:109° ATDC Intake / 119° BTDC Exhaust
Open/Close @.050'' Cam Lift:Intake - 13° BTDC (opens) / 51° ABDC (closes)
Exhaust - 67° BBDC (opens) / 9° ATDC (closes)

Items You Need

Before you leave us... Receive a free catalog or join our email list

Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

Request CatalogJoin Email List