FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Daystar KU71104BK - Daystar Polyflex Hood Pin Kits

Daystar KU71104BK - Daystar Polyflex Hood Pin Kits

JEGS Part Number: 319-KU71104BK

Polyurethane Hood Pin Kit
  • Black
  • (1) Polyurethane Grommet
  • (1) 5/8" Pin
  • Stainless Steel Hardware
      $18.95 Ships

    Daystar KU71104BK - Daystar Polyflex Hood Pin Kits Details

    Polyurethane Hood Pin Kits

  • Race-Style Hood Pins
  • Offer Secure Hood Hold-Downs While Maintaining Quick/Easy Removal
  • Isolates The Hood
  • Keeps Fiberglass Hoods From Cracking Around Attachment Points
  • Universal Fit/Works w/Any Style Fiberglass/Steel Hoods
  • Includes All Necessary Hardware For Assembly
  • Limited Lifetime Warranty
  • Made In The USA

  • Daystar's Polyflex Hood Pin Kits solve the problem of cracking fiberglass or paint damage common with hard mounted hood pins. These easily removable polyurethane grommets buffer the hood from its attachment points allowing for the needed flex, yet still maintain a positive attachment. Kits includes a 5/8" diameter steel pin, stainless steel fasteners, and a spring retaining clip. Made in the USA.

  • Constructed of High-Quality Polyurethane Material
  • Prevents Fiberglass Cracking and Paint Damage
  • Includes the Necessary Components for One Complete Hood Pin (2 needed for a common installation)
  • Components are also available individually
  • Made in the USA

  • Daystar 319-KU71104BK

    Manufacturer's Part Number:
    Rated 2 out of 5 by from Great concept Bought these for an aftermarket fiberglass hood after a recommendation from someone else with a similar setup. In an ideal scenario these would have been perfect. However Daystar provides no instructions whatsoever. No biggie right? After all your not joe weekend garage guy if you need and are going install these yourself. However I chose the mounting location based upon where I wanted/needed the pins themselves and how my Mustang is setup. So I grabbed my hole saw and went to town. This is where I got disappointed, because obviously no two vehicles are a like and not are the hoods. I chose a spot far to the sides thankfully, however the hood was still thick enough where these daystar pieces needed to be deeper in design. I may write to them yet to see what my options are. Furthermore there is still a contour to my hood as it is a ram air hood, but I would think almost all would have some form of curvature unless your running a 440 six pack challenger... The polyurethane does not work well with contours. There are a couple bumps in them now, kinda of disappointing on a show car. Lastly the 1" bolts and lock nuts they provide are equally useless because my hood is well over that thickness wise, as I would imagine all hoods are. Long story short, make sure you going into these with low expectations or a back up plan if you are looking for show quality fit and finish.
    Date published: 2015-10-26
    • 2015-11-27T08:36CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_1999908, PRD, sort_relevancy
    • clientName_jegs
    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69