Instant Rebates
Call Our Support Line
24 Hours / 7 Days a Week!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 10030Z

Detail Paint Tank Tone Metallic Coating

Eastwood 10030Z


ORMD Item - Ground Shipping Only
made in usa
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 10030Z Detail Paint Tank Tone Metallic Coating $12.99
Detail Paint
  • Tank Tone Metallic Coating
  • 13 oz Aerosol

  • Eastwood 10030Z Details

    Don't mistake this for ordinary silver gas tank paint! This fuel tank paint actually contains zinc to protect your gas tank from rust. Since many gas tanks came from the factory with a similar coating, spraying on fuel tank paint is a natural part of your gas tank restoration project. For best results, remove all paint and undercoating from the tank before spraying on this gas tank paint. Works well over minor surface rust and helps stop it from spreading, to make your undercarriage detailing truly the best. Two cans are recommended for complete coverage on the average tank. No primer needed.


    Manufacturer's Part Number:

    Eastwood detail paints are just what you need to give those old parts that fresh new look. Whether it be restoring an old gas tank or making a set of headers look brand new again. Eastwood has you covered with a wide variety of application specific paints to get the job done.

    10030Z - Eastwood Detail Paints is rated 3.1 out of 5 by 17.
    Rated 5 out of 5 by from Great item Jegs received this item lightning fast. oh and i place one of the complimentary stickers on my sticker wall and gave the other one to my brother so when he orders parts he knows where to look.... JEGS.. thanks again.
    Date published: 2016-02-10
    Rated 5 out of 5 by from Gas tank paint Works excellent. The only thing I recommend is to put the cans on a shaker before using.
    Date published: 2015-11-09
    Rated 5 out of 5 by from Nice Color If you do not have a NEW GAS TANK, then this is the next best thing. It is about the closest color for a gas tank that is available on the market today. Of course I prefer the galvanized look of a new gas tank, but if the existing tank still operates fine, this is a whole lot less money. Also, not all gas tanks are available as a reproduction so this is the next best thing.
    Date published: 2014-12-11
    Rated 4 out of 5 by from Nice finish I made my own tank and wanted it to look factory. I do suggest priming, Used an epoxy gray for base. Shake well even as you are using, if concerned about drips wipe nozzle as you use it and keep finger towards rear of nozzle. Sounds stupid but it is a harder to push on this can. Go easy on coverage, I found good results by many light coats. It appears to be blotchy but when dries it is uniform. This paints on similar to cast iron color paint, don't concentrate heavy in one area. I was very pleased with the results. Just take your time.
    Date published: 2016-04-03
    Rated 4 out of 5 by from So far so good! Used this product on a 57 Chevy gas tank. This paint looks a bit blotchy when its first sprayed but once it dries it looks really nice with a uniform color. Cant say how it will look after a few years but so far I am very pleased. Did not have any issues with the nozzle clogging or spattering as other reviewers have stated.
    Date published: 2015-12-30
    Rated 4 out of 5 by from Metallic Tank Coating for the first seconds, the paint sputtered out of the can but after that it went on smoothly, no runs, no fisheye. Was pleased with the finish it gave the tank, looks original and didn't change the color much from the bare metal. I used this product on a new, replacement tank. will purchase another can to touch up as it got some scratches when installing it.
    Date published: 2015-10-16
    Rated 4 out of 5 by from Looks great media blasted tank before painting. came out great, 1 can covered in 3 coats on a C3 Corvette fuel tank. Judging from other reviews and my experience, I would change the design of the spray nozzle. Trigger type nozzles are much better.
    Date published: 2015-03-17
    Rated 4 out of 5 by from TANK TONE Agree at times there is spatter and spitting however after two coats and drying it looked good. I have used a lot of Eastwood products and they always attempt a quality product.
    Date published: 2015-02-24
    • y_2017, m_9, d_21, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_17
    • loc_en_US, sid_10001_10001_1300435, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List