Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
0
My Cart
$0.00
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
Help

Eastwood 10165Z

Gas Tank Sealer Kit Includes: One 7 Ounce Can Metal Wash



Eastwood 10165Z

Part Number: 352-10165Z

Gas Tank Sealer Kit
Includes:
  • One 7 Ounce Can Metal Wash
  • One Pint Rust Remover
  • Two 16 Ounce Bottles Gas Tank Sealer
  • ORMD Item - Ground Shipping Only
    $53.99
    Ships
    Made In USA
    Eastwood 10165Z Gas Tank Sealer Kit Includes: One 7 Ounce Can Metal Wash $53.99

    Eastwood 10165Z Details

    You will need to purchase Muriatic acid from your local hardware store to clean the tank. The acid will need to be diluted 20:1.

    Specifications:

    Manufacturer's Part Number:
    10165Z

    A clean fuel supply is critical to the performance of your vehicle; hard starting, stumbling under load, and sluggish response may be symptoms that your car's fuel system is dirty. The best way to ensure fuel is clean is to keep the fuel tank free of rust. For metal tanks up to 20 gallons, the Gas Tank Sealer Kit seals minor leaks and can save you a great deal of time and money if trying to locate a replacement tank. Kit contains a 7 oz can of Metal Wash, one pint of Rust Remover, and two 16 oz bottles of Gas Tank Sealer.

    10165Z - Eastwood Gas Tank Sealer Kit for Cars is rated 4.0 out of 5 by 15.
    • 2016-09-24T08:58CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_15
    • loc_en_US, sid_10001_10001_1355764, PRD, sort_relevancy
    • clientName_jegs
    Rated 5 out of 5 by from Works really well I haven't used my last order but used this tank sealer 3 other times with good results. This will be the first time on a diesel tractor tank. I do one more step that is not in the instructions. I put about a shovel of drive way gravel in the tank and strap the tank to one of the rear tractor. With the tractor tire jacked off the ground and secured safely (SAFETY FIRST), I start the tractor and put it in gear and let it tumble. The gravel takes care of the rust and lets you know if the tank is worth saving. Then I go thru the steps on the instructions. This is not a method for every one, but works for me.
    Date published: 2016-07-20
    Rated 4 out of 5 by from It works I fabricated a new gas tank for my project car and needed a sealer for the inside of the tank. The kit applied as advertised although you have to work quickly. The muriatic acid bath did seem to bubble a little because I didn't work fast enough although it turned out to be not a problem. This is a new tank so I don't know how well the Metal Wash would work on a used tank. The Fast Etch worked well. It seems to be the same stuff as Eastwood's Afterblast solution so if you don't have enough and you have Afterblast you can use that. Happy with the product as with all of Eastwood's products I have used.
    Date published: 2016-05-04
    Rated 1 out of 5 by from What warranty? Beware! After following the sealer directions to the letter we put the three tanks on the shelf for use in on going projects. After a few months the coating began peeling off and I contacted Eastwood about the problem. We were told by tech support that they had no other reports of problems with the sealer. I now see that there have been many reports of problems and that the only responsibility that Eastwood has is to return the cost of the product. This "lifetime warranty" is a joke when you consider the cost of removing the faulty sealer ($100). I am now wary of any Eastwood products since they are obviously not interested in customer satisfaction or standing behind their products. Tom Miller.
    Date published: 2016-08-12
    Rated 1 out of 5 by from believe what you hear i heard these kits were not any good. i should have listened i meticulously followed the instructions. had a nice clean tank ready for the final sealer. then after pouring the sealer in the tank, i realized there was not enough product to seal my tank (a 20 gallon non baffled tank to a 70 torino.) the sealer didn't seal the entire tank and now i have ruined my tank. lesson learned. just threw away my $ and my tank.
    Date published: 2016-05-17
    Rated 4 out of 5 by from Salvaged a badly rusted tank This kit worked great for my project. The tank was really rusty and pitted inside. After using the first wash solution, I decided to try my power washer nozzle inside. That removed the rest of the varnish. The rest of the job went great and I was able to salvage a tank that would have cost $400.00 to replace.
    Date published: 2015-12-21
    Rated 3 out of 5 by from 1st time tank seal This was the first time I have ever tried to reseal a tank. I used the product per the instructions. I believe everything worked good. I will not know how long the sealer is good for but only time will tell. The tank was from a 1978 Bronco, 25 gal.
    Date published: 2015-09-21
    Rated 4 out of 5 by from Awesome product. Great value I bought this product for a customer that had a "Custom" gas tank built and when I was installing a fuel gauge sending unit I looked inside and seen nothing but rust. Instructions are pretty easy, but the 20 to 1 on the acid didn't do anything.
    Date published: 2015-12-23
    Rated 5 out of 5 by from Simple and fast Pulled a rusty tank on a vw bus and was left with the question what shall I do after seeing this Eastwood kit and purchasing it my tank is now good as now great product would recommend to all my friends
    Date published: 2015-09-09
    • 2016-09-24T08:58CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_15
    • loc_en_US, sid_10001_10001_1355764, PRD, sort_relevancy
    • clientName_jegs
    Easy Kits
    Only $89.17
    Order Today
    Ships 09/28/16
    Items You Need