Fathers Day
Call Our Support Line
24 Hours / 7 Days a Week!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Top Categories
All Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 11616

Multi-Unit Welding Cart Will Fit MIG135, MIG175, TIG200 or MIG250 with Versa Cut Plasma Cutter on The Bottom

Eastwood 11616


jegs shipping
FREE Shipping
Estimated ship date 09/05/17 if Ordered Today
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 11616 Multi-Unit Welding Cart Will Fit MIG135, MIG175, TIG200 or MIG250 with Versa Cut Plasma Cutter on The Bottom $99.99
Multi-Unit Welding Cart
  • Will Fit MIG135, MIG175, TIG200 or MIG250 with Versa Cut Plasma Cutter on The Bottom
  • Overall Height 26"
  • Overall Width 16"
  • Overall Length 38"

  • Eastwood 11616 Details

    Welding Carts

    Welding Cart Dimensions
  • Total Height - 26"
  • Total Width - 16"
  • Total Length (not including Handle) - 32"
  • Total Length (including Handle) - 38"
  • Top Shelf Width - 11.75"
  • Middle Shelf Width - 11.75"
  • Bottom Shelf Width - 11.75"
  • Top Shelf Length - 20"
  • Middle Shelf Length - 15"
  • Bottom Shelf Length - 17.5"

  • Specifications:

    Manufacturer's Part Number:

    Eastwood's Welding Carts were designed by The Eastwood Company to make storage, accessibility, and maneuverability of your welder easier than ever before. These carts incorporates a top shelf which will hold a variety of MIG or TIG welders and the bottom shelf will store your Versa Cut Plasma Cutter. All of the Eastwood Carts include a Gas Bottle Mount along with other storage features.. Assembly can be done with simple hand tools.

    JEGS Easy Kits are designed by JEGS high performance racing professionals to help you get all the performance parts you need for your race car, hot rod or truck.

    11616 - Eastwood MIG/TIG/Plasma Welding Carts is rated 4.4 out of 5 by 67.
    Rated 4 out of 5 by from Almost perfect. I originally purchased this cart in 2013 to carry my TIG200. Assembly is fast and everything goes together as it should. I added a small ratchet strap because the TIG200 is tall. Fast forward to 2016...I received my MIG250 and put it on the cart. The front lip was too tall and the MIG250 didn't sit right. It wouldn't be a major modification and they were on sale so ordered another. To my surprise, they've changed the design to accommodate the MIG250 and it fits perfectly. My only real issue is the limited bottle capacity. I do a lot of MIG and an 80cuft. bottle is gonna mean more refills.
    Date published: 2016-06-26
    Rated 2 out of 5 by from Overloaded when used as directed When used as directed this cart will be toting around well over 100 pounds so it needs to be strong. Unfortunately, cheap hardware and flimsy metal in key areas really let it down. It flexes quiet a bit laterally at the front which could have been aided by additional reinforcement around the lower end of the front vertical supports. The large rear wheels have actual bearings (good) but they are not even remotely close fitting to the axle that slides through them (bad) resulting in more wobbliness. I'm disappointed that improvements that really don't cost a lot (if anything) were not made to this cart before it came to market. An additional issue is that my tig filler metal tubes do not fit in the holes in the back area designed for them.
    Date published: 2014-12-31
    Rated 5 out of 5 by from Welding Cart The Eastwood Multi-Unit Welding Cart is of high quality with good casters and wheels. When bolted together it is solid and with out wobbling, well able to hold the weight of two welders and a tank. Only two grips. 1. It has lots of sharp edges. 2. There is nothing to hold the top welder in place. In my case a Hobart Handler 190. I would like to have some strap or clamp or some thing to hold it in place. I'll have to find a way my self.
    Date published: 2014-10-30
    Rated 4 out of 5 by from It works. Seems pretty good for the price. Assembly instructions OK. Result a little less sturdy than I expected, not rock stable, wobbles from side to side a little at the front when you lean on it, but supports welder OK on top shelf. Probably will add support somewhere in the front, when I figure out where (perhaps angle irons on the front verticals--those front verticals could use some reinforcement, there is not much to keep them from going from a square to a parallelogram). Also, you may want to get a few extra bolts for assembly, as the supplied bolts have a Rockwell hardness of somewhere between pudding and jello (I stripped one with about a 4in long mini-ratchet driver, and essentially no hand strength).
    Date published: 2017-02-19
    Rated 4 out of 5 by from Nice cart Easy to assemble, good quality, and sturdy. This is a nice design for a welding cart designed to hold two machines. My welder tends to slide around on the top more than I'd like. I'm going to put a small lip on both sides to make sure my welder doesn't get pulled off inadvertently. One other change I'd like to see is replace the shelf with a drawer. I realize this would increase the price a little but, personally I think that addition would make this a five star cart.
    Date published: 2015-05-16
    Rated 5 out of 5 by from Great products, unreliable pricing I have purchased both the tig and mig welders with carts - included in a package and separately - have been exceptionally well treated by customer services (beyond belief) and very happy with the quality relative pricing - sometimes - except that I feel like I've been screwed when the price quickly drops (i.e. look at tig/plasma cutter combo prices in past. I know it is marketing but still makes me reluctant to buy here.
    Date published: 2014-12-11
    Rated 5 out of 5 by from Welder cart Fits my welder and cutter very well,sturdy construction , perfect for what I need!
    Date published: 2015-07-15
    Rated 5 out of 5 by from Easy to build and sturdy too I bought this to hold my mig and plasma cutter,like a few others has said you need more holders for the leads, but overall a good unit. Instructions are clear as a bell went together and everything fit like a glove. Still new to me so I will come back after a while and update. I don't weld every day or week and the people who say the bigger tank wont fit are using it a lot more often and should have then bought a commercial cart and then if they do so much welding then they could adapt the cart to fit a larger tank.
    Date published: 2014-12-08
    • y_2017, m_6, d_25, h_2
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_67
    • loc_en_US, sid_10001_10001_1990787, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need