Fathers Day
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Eastwood 11737

Master Blaster Dual Blaster Includes Extra Nozzles And Moisture Filter

Eastwood 11737

352-11737

jegs shipping
FREE Shipping
Ships
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 11737 Master Blaster Dual Blaster Includes Extra Nozzles And Moisture Filter $399.99
Master Blaster Dual Blaster
  • Includes Extra Nozzles And Moisture Filter

  • Eastwood 11737 Details

    Pressure Blasters

    Unit weighs 80 lbs.

    Specifications:

    Manufacturer's Part Number:
    11737

    The Eastwood Dual Blaster is the best of both worlds. You can now select the media to suit the job. Switch between soda and abrasive in seconds or mix at an infinite ratio between the two medias. The exclusive mixing valve allows on the fly mixing or selection between the two abrasives and allows you to cut blasting times in half. Use the soda to remove coatings on delicate substrates such as fiberglass, chrome, stainless, etc & quickly switch to abrasives such as crushed glass, glass bead, aluminum oxide, etc in seconds to blast through heavy scale, rust or multiple coatings. This machine is a must for the serious home hobbyist. Each tank holds 100lbs of media.

    Features:
  • Switch Between Medias in Seconds or Mix at an Infinite Ratio Between the Two
  • On-The-Fly Switching or Mixing Saves You Money & Cuts Blasting Times in Half
  • Each Tank Holds 100 Pounds of Media or 75 Pounds of Soda
  • Works On as Little as 10 CFM at 90 PSI
  • 10 Foot Long, Heavy-Wall Blast Hose

  • 11737 - Eastwood Master Blaster-Dual Blaster is rated 2.7 out of 5 by 7.
    Rated 1 out of 5 by from Dual Blaster Piece of junk. The location of the feed valve is terrible and poor quality, you need 3 arms to use as the sand does not flow. I initially wrote Eastwood on some design recommendations and never heard back. I now have my blaster on a roller cart which elevates the tank so I can work the feed valves, I purchased a concrete vibrator and fixed to my stand to give a steady vibration to help the sand flow. If I had to do again -- I would not have purchased this product -- overall extreme poor quality in components and construction.
    Date published: 2014-11-26
    Rated 5 out of 5 by from Very versatile I bought this to strip an entire 63 Falcon. There is definitely a learning curve but if you're patient and keep experimenting with the media valve and throttle valve you'll be blasting for hours with no trouble. I love mine so far! I've stripped both front fenders (inside and out) both doors (inside and out), and am now working on the hood and deck lid. I use black beauty in the abrasive side with no trouble so far! Do yourself a favor and buy a sifter (it fits the top of a 5 gallon bucket perfectly) and a good hood. I'm curious how long the valves will last after reading the reviews but I realize they won't last forever flowing abrasive through them but hopefully they will last awhile. I also put a tie wrap on the dead man valve (loosely so that it can be slid off and on) because holding the handle down gets tiring.
    Date published: 2015-03-29
    Rated 5 out of 5 by from it's great tool for my hotrod shop i been working on a outlaw cyber stock car now it time to work on the car trailer to haul it to the race track it works super just like i thought it would my next project is a 1970 dodge challenger looking forward to that thank- you eastwood for a great tool in my shop looking to purchase more tools from your company thank-you terry B michigan
    Date published: 2015-04-29
    Rated 1 out of 5 by from waste of money Painfully poor design and construction overall, 2 man job just to use the thing. Even with a inline air dryer and water separator the media still clogs up in the tank and hose. All the valves are no good after you use it 2x. The hose needs replacing faster than expected, clamps too loose and every one had to be replaced... I could go on.. do urself a favor and go pay a pro.
    Date published: 2017-05-03
    Rated 3 out of 5 by from Have a friend Got this blaster as a gift to blast truck frames, YOU will need a friend with you to get it to work right but will do a good job on rust
    Date published: 2016-01-02
    Rated 3 out of 5 by from sorry byt this is baad After using about 60-80 kg of abrasive machine has become leaking valves for replacement ..... hard set parameters of work
    Date published: 2017-04-21
    Rated 1 out of 5 by from Biggest waste of money in my life Bought it a couple of years ago worked for about 10 seconds and clogged.
    Date published: 2017-03-19
    • y_2017, m_6, d_23, h_11
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_7
    • loc_en_US, sid_10001_10001_1355773, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need