Jegs Free Catalog
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Category
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Eastwood 11971ZP

After Blast-Metal Prep 1 Gallon

Eastwood 11971ZP

352-11971ZP

ORMD Item - Ground Shipping Only
jegs shipping
Ships from Manufacturer
Eastwood 11971ZP After Blast-Metal Prep 1 Gallon $39.99
After Blast-Metal Prep
  • 1 Gallon

  • Specifications:

    Manufacturer's Part Number:
    11971ZP

    Eastwood After Blast is designed to clean, degrease and etch freshly blasted or sanded metal prior to painting or powder coating. Simply use a plastic spray bottle to liberally apply After Blast to the part, wipe and reapply until all of the contaminants have been removed. This blend of aqueous cleaners and phosphoric acid properly cleans and etches metal and will leave a zinc phosphate coating that is excellent for paint, primer or powder adhesion. After Blast also protects the metal from flash corrosion for extended periods. Use on all of your fresh cast iron, steel or aluminum components.

    Features:
  • Spray, Wipe & Repeat Until clean
  • Aqueous Cleaners & Phosphoric Acid Clean & Etch the Metal
  • Zinc Phosphate Coating Improves Paint, Primer or Powder Adhesion
  • Protects Against Flash Corrosion

  • 11971ZP - Eastwood After Blast-Metal Prep is rated 4.6 out of 5 by 15.
    • y_2017, m_2, d_20, h_12
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_15
    • loc_en_US, sid_10001_10001_1355775, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Rated 5 out of 5 by from After Blast Hi, I have had more of a chance to use After Blast and I must say it works really good for powder coating. I'm about ready to buy my second gallon but to my surprise you have raised the price, I already thought its was to expensive by the time I get it with freight its well over $50.00 that's a little to expensive. Is there a way to thin it out.? If not I may have to look for a another solution. Thank You Richard
    Date published: 2015-02-08
    Rated 5 out of 5 by from Great Product! "But Please Read" I have a 71 Camaro that I am restoring sandblasted the car, there are some spots that had the factory e-coat (Factory Primer) still on the car. this was due to it was in great shape. When I used the After Blast on the bare metal it worked Awesome!!! it cleaned and etched the bare metal perfectly! But when the after blast got on the primer it leaves a residue Just be sure to clean it off and scuff the primer. I cleaned it off with prep all (a wax and grease remover) then wiped down the entire surface including the bare metal again with the prep all again using the blue shop towles wiping each wipe with a clean side of the shop towel. I used ppg epoxy primer and followeed it with Eastwoods chassie black paint. I am very happy with the results and happy with the Eastwood products!!!
    Date published: 2015-03-10
    Rated 4 out of 5 by from Don't know I purchased used After Blast on a bare metal car project after the car was blasted it had a grey coating from the sand product that was used by the blaster. So i sanded off the coating to get it down to a more clean metal look. Upon first applying the After Blast to the front fenders it did an outstanding job cleaning and keeping a uniform clean finish, however a week later i went to do the same to the sides and rear area of the car and found the product was streaking and leaving a white residue so i decided to change out the left over product in the spray bottle which made no difference. Is there a temperature thresh hold on when using After Blast? Just needing to figure this out any help on this will work
    Date published: 2017-01-17
    Rated 2 out of 5 by from Needs perfect condictions. I'm disappointed with this product. I think it would be good in perfect conditions like flat surfaces but I'm not so sure using it on automotive applications. Beware leaving any After Blast solution anywhere on the surface to be primed or painted, it will not stick in those areas. This stuff is like water so you have no control it runs. Beware After Blast seeping through panel cracks onto other primed surfaces, those areas will have to be re stripped and re primed. I had high hopes for this product but was very disappointing after speeding a week blasting and prepping the bottom side of my F100 bed for primer and paint only to have the primer peel up in the areas where it dripped and ran uncontrollably. I also have to re blast the top side of the bed that was primed and ready for paint because this stuff seeps through the seams an dries unnoticed, now the areas that were ready for paint are now contaminated. I tried my best to clean up the mess that peeled and went ahead and painted it because I didn't want to spend another week and the expense of blasting media to start over, I have little faith this will last as long as I had hoped. I will NOT be using it on the rest of this build that's for sure. I'll stick with acetone as my surface prep.
    Date published: 2015-12-08
    Rated 5 out of 5 by from The product is great!@! The problem is like I stated in my last review its to expensive. So yesterday I saw it on sale and I thought great I'll get two gallons, dwell I came back today and the sale is off I was just to busy to place the order at that time. My suggestion is put in plan site SALE FOR 24 HR ONLY and I bet you would sale a lot more, the stuff works perfect. .
    Date published: 2015-02-10
    Rated 4 out of 5 by from Great Product!!!!! I use this on all my freshly blasted parts, as well as on any metal parts that I have scuffed up prior to painting in order to help prevent corrosion. Also works well with my TIG-welded parts. No weld incompatibility problems or reactions from After Blast........ Works very well. A little "pricey" though...but still a Great product!
    Date published: 2015-07-14
    Rated 5 out of 5 by from great surface prep for paint. After blast is a super, easy to use product that sprays on and wipes off, leaving bare metal super clean and grease free. A great paint prep product to ensure paint adhesion, And it leaves a zinc phosphate coating on the metal to help Protect against rust !
    Date published: 2016-08-19
    Rated 5 out of 5 by from This stuff works! Use Afterblast on cromoly steel bicycle frames. After cleaning and degreasing, I spray on inside and outside of tubing. Even after rinsing with water, bare frame stays free from flash rust until I hand it off to my painter. Great product.
    Date published: 2015-01-18
    • y_2017, m_2, d_20, h_12
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_15
    • loc_en_US, sid_10001_10001_1355775, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need