Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

Eastwood 12011 - Eastwood MIG-135 Welder

Eastwood 12011 - Eastwood MIG-135 Welder
Eastwood 12011 - Eastwood MIG-135 Welder

JEGS Part Number: 352-12011

MIG-135 Welder
  • Face Shield
  • Gas Regulator
  • .023" Steel MIG Wire
  • Tip Wrench
  • Extra Tips
  • Wire Brush

    Eastwood 12011 Details


  • Output Amperage Range: 25-135 A
  • Maximum Output No Load Voltage: 28 V DC
  • Maximum Input Amperage: 20 Amp
  • Input Voltage: 120 VAC 60 Hz
  • Rated Duty Cycle: 20% @ 90 A
  • Wire Feed Rate: 40-450 IPM
  • Welding Wire Spool Sizes: 4-8 in
  • Weight: 56 Lbs. (25kg)
  • Overall Dimensions: 16.5" (408 mm) x 9.6" (244 mm) x 14.5" (367 mm)
  • Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)

  • Eastwood MIG-135 Welder

    Built for Professional Use with a Weld-at-Home Price

    Eastwood developed the MIG-135 Welder to produce excellent bead quality and capabilities that match or exceed more expensive units. It operates on standard 110V AC 20 amp circuits and is capable of welding mild or stainless steel. Eastwood Welders meet the standards of top U.S. industry leaders in both weld penetration and wire feed motor function. The MIG-135 has a switchable drive roller to run small gauge solid wire or thicker solid or flux cored wire.

  • Welding Range: 25 to 135 amps
  • Powered by standard 120V household current
  • Countless voltage and wire speed combinations
  • Thermal overload switch and adjustable drive roller
  • Welds mild steel, stainless steel, and 24-gauge 1/4" steel
  • Tweco-style gun & consumables, 8' gun cable, and 8' ground cable
  • Face shield, gas regulator, MIG wire, tips, tip wrench, and wire brush included

    JEGS Easy Kits are designed by JEGS professionals to help you get all the performance parts you need.

  • Eastwood 12011

    Manufacturer's Part Number:
    Rated 5 out of 5 by from I'm An Eastwood Guy! When I started my search to finally get myself a MIG welder I had never heard of Eastwood until I read a review In Popular Mechanics magazine, so I jumped on the website and continued my research only to come back and purchase the MIG 135, and I could not have made a better choice for my needs. This is an awesome welder and an incredible value! The ability to "dial in" this welder is a great feature that can make a novice better in short time. I have not had the welder long enough to speak to reliability over time, but you can bet that I will report back about any issues; but in the meantime I'm loving everything about this little welder.
    Date published: 2015-01-08
    Rated 5 out of 5 by from Eastwood MIG 135 Amp Welder I watched many welder reviews on youtube and decided on the Eastwood MIG 135 amp welder. The price is great. The videos that Eastwood produces to get you started and set up are really helpful. I have a car project I am working on. I have a lot of practice ahead of me before am proficient and can begin to work on the rusted out fender on my car. Even thought my dad was a welder by trade I never did learn to weld. I am now 70 years young and I'm having a great time learning. I can't help but wonder if those who had challenges had some set up problems. I did purchase the gas, but thought I would learn using flux core wire first. Great little welder.
    Date published: 2015-01-20
    Rated 5 out of 5 by from Incredible little machine I purchased the 135 mig a month ago, and I'm very impressed with its performance! I've welded for 25yrs, with almost every brand of mig available in the USA, and I'm impressed! I welded with it for over an hour solid, on high, on 1/4" mild steel, flat, vertical, and overhead, and never did reach its duty cycle nor did it hit temp overload. Has a great sizzling sound, lays beautiful beads, just overall does wonderful! Only drawback is, the description says it welds up to 1/4", and it will, it just won't penetrate well on 1/4". I'd be safe to say its limit is 3/16", but for the price, I'm not complaining at all! Worth every penny, period!
    Date published: 2014-12-23
    Rated 5 out of 5 by from Wow! I am so impressed! I had a Clarke 130EN that should have been a great quality welder but it was giving me a lot of problems and was leaking gas. It doesn't take more than a single tank of missing welding gas to make a person realize that buying a new welder is a good idea. Anyway I am thrilled with the Eastwood welder. It works beautifully. I have had no problems and the quality of my welds has been fantastic. BIG THUMBS UP! I can say that I wish I had the money to buy the 175 instead though. Drilling holes for every spot weld gets old but it still works perfectly. If you can afford the larger unit and have the 240V power available I would recommend going that route.
    Date published: 2015-06-30
    Rated 4 out of 5 by from Excellent value I purchased this welder about a year and a half ago and have welded a variety of thicknesses of metals excellent results. Once I got the speed and heat dialed in, with a 75/25 mix shielding gas as well, it makes welding as thin as 20 gauge steel fairly easy with a bit of patience and practice. It has yet to trip my 120v circuit which my 5hp, 60 gallon air compressor will occasionally blow. The only complaint I have, is that recently the plastic gun portion of the welder has cracked. I'm not especially rough with my tools and it's not something that a little electrical tape couldn't fix, but I figured it was worth mentioning.
    Date published: 2015-11-09
    Rated 4 out of 5 by from Novice's first mig welder Ive been looking for a mig welder for a while now. I did some arc welding about 20 years ago. I had many Jeep and home projects to do - and was sick at the thought of paying someone to do something ive always wanted to do. After much research i came to this eastwood welder. what a great surprise. I literally was up and running in about a week. Found some shielding gas, got a cheap welding cart, mask, and gloves. Practiced, watched youtube videos. Week number two i rebuilt the spare tire carrier for my jeep. This welder makes it easy to look like you (almost) know what you're doing. I welded wverything from 22 gauge sheet to 1/8" stock no problem. Well worth the money.
    Date published: 2016-05-01
    Rated 1 out of 5 by from not good at all i spent months reviewing this welder and seeing what other people had said there was a lot of positives but for me it was the opposite i really truely can lay a better bead with my hf flux cored welder this thing cant get through 1/8" ive tried 12 gauge extension cords and also a 10 gauge rv extension cord ive tried multiple different outlets and plus the wore speed and voltage are backwards iam just not happy at all with this welder i should have just bought a lincoln or something of higher quality i just bought it because of the infinite voltage control but oh well never purchasing from eastwood again
    Date published: 2015-09-09
    Rated 5 out of 5 by from Great Customer Service I don't know how to weld so I bought this welder to learn after being recommended to me by someone that welds all the time with this machine. It worked out of the box but since I don't weld I cannot give an honest assessment of its abilities. It was a little difficult to get the wire fed but I finally got it. What I really want to compliment is the customer service. Since I had left the gas bottle open for a couple of months without using it I thought all of the gas had leaked out. Turns out the gauges were bad and not letting gas through. I called Eastwood and told them the problem and had new gauges in about 4 days with no hassle or problem. I can't ask for better service than that.
    Date published: 2014-10-01
    • 2016-05-23T12:45CST
    • bvseo_cps, prod_bvrr, vn_cps_3.2.1
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_150
    • loc_en_US, sid_10001_10001_1990788, PRD, sort_relevancy
    • clientName_jegs
    Easy Kits
    Only $483.36

    Eastwood 19016 - Eastwood Intergrip Panel Clamps
    Only $33.36

    Eastwood 13901 - Eastwood Spot Weld Kit
    Only $37.44

    Eastwood 11616 - Eastwood MIG/TIG/Plasma Welding Carts
    Only $103.99

    Eastwood 12115 - Eastwood 6-Piece Welding Clamp Pliers with Case
    Only $96.99

    See All Items You Need