FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Eastwood 12012 - Eastwood 175 Amp Mig Welder With Spool Gun

Eastwood 12012 - Eastwood 175 Amp Mig Welder With Spool Gun


MIG-175 Welder With Spool Gun

Eastwood 12012 - Eastwood 175 Amp Mig Welder With Spool Gun

Eastwood's MIG-175 Welder delivers professional and quality weld penetration along with wire feed motor functionality. 30% duty cycle at 130 A. Operates on standard 210-240V AC 22 Amp circuits. Unit includes 0.030" solid mig wire, 0.030" solid aluminum wire, gas regulator, spool gun, and instruction book. Requires only 75% Argon/25% CO2 bottle. Eastwood's R&D guys designed the MIG-175 Welder for steel and aluminum to produce excellent bead quality and capabilities that match and exceed the more expensive competition!

  • Welds mild and stainless steel, 24-gauge to 5/16"
  • Welds aluminum, 14-gauge to 1/4"
  • 30-175 amp welding range
  • Includes spool gun
  • Powered by 220V current
  • ETL Approved
  • 3-year warranty

    Eastwood MIG Welders Video
    Eastwood MIG-175 Welder Video

    These Easy Kits are designed by the experts at JEGS to ensure quick and easy installation.

  • Eastwood 352-12012

    Manufacturer's Part Number:
    Rated 4 out of 5 by from Good Value I've had the MIG 175 for a little over a year and it worked flawlessly until the plastic housing containing torch/gas line connection broke. I was bummed when I read review by Jim53 claiming customer service didn't respond to the same problem. Fortunately that was not the case for me - customer service instantly mailed the part (complete drive unit, wire feed motor and all) to me and I was back up and running within 3 days. I would recommend the unit, but be very careful about putting any strain on the torch connection as this is cheap plastic - they should improve the design. Overall it's a great welder for the money.
    Date published: 2015-03-23
    Rated 1 out of 5 by from Gas Line Hookup Broke After using the welder about 5 times I heard a hissing inside of the welder when I turned on the gas. I found the plastic connection inside of welder that the air line plugs into was broke. This cant be simply fixed because it is molded into the plastic that houses the wire feed wheels. I tried calling Eastwood many times. I was always transferred to tech support and always put into a answering machine that said something like “All our techs are busy-tell us your problem, leave your name and number and we will call you back”. I left many messages but never got a call back. I don’t like flux core welding so I shelved the unit, lost hundreds of dollars and bought a different brand.
    Date published: 2015-01-02
    Rated 1 out of 5 by from It's not worth it Well all I got to say is go put your money into a well known brand named welder and you will be very happy with it knowing that it will always work unlike this one I got but retuned it for my money back because I went through 3 of these welder with in less than a year. Reason why is the gas selonoid will not work like how its really suppose to. Besides when you get the package it says on the side something like manufacture in CHINA. So yeah it China made quality stuff. Well learn a lesson for me and how it willfor some of you guy thinking about getting this welder. Go spend that extra money on a miller or linclon and you will be one happy person. Got me a linclon welder coming in at airgas.
    Date published: 2015-01-02
    Rated 5 out of 5 by from GREAT UNIT I received 175 about a week ago. A great welder right out of the box. This box has enough juice at 175 to handle everything I am fabricating for my cars. Have not tried the spool gun but look nice in the box. I bought a gas bottle for argon at HF and had it filled for $15 at the local welding supply store. So I will give some aluminum a try shortly. It's not really a complaint but the side door goes all the way to the bottom of the mig so I had to put some plywood on my cart to raise the mig so the door would clear the cart. I have been using almost everyday since I got it. Very happy.
    Date published: 2015-07-14
    Rated 5 out of 5 by from Great Value I got my Eastwood MIG 175 Welder yesterday and couldn't wait to get it setup. I went right to town and picked up a tank of Argon, set up the spool gun and welded aluminum for the first time. After 5 minutes of practice on some scrap, we rolled our Aluma trailer into the shop for some repairs. 2 years ago I took this trailer to a pro weld shop to have some cracks repaired - they lasted 3 days before they cracked again. If I may say so our welds look a whole lot better than those of the weld shop. We are very impressed with this welder!
    Date published: 2014-10-09
    Rated 4 out of 5 by from EXCELLENT CUSTOMER SERVICE I bought the Eastwood 175 on Monday and it was at my house Tuesday. I set it all up and found two small problems. The hose between the bottle and the machine was sliced at the crimp fitting, and the wire drive motor on its highest setting would feed at a high rate, then slow down after about 3 seconds of feed. I emailed them last night and someone from tech support called me at 10am this morning and they're sending a new drive motor and a new hose. I am very happy with their customer support. I hope this machine lasts many years.
    Date published: 2015-01-07
    Rated 5 out of 5 by from I absolutely love the potential this welder has !! I bought this welder a month ago for my new home based welding business . I'm more than impressed with this machine , it has serious potential and does some serious work . I would recommend this welder to anyone , whether its for a business or just an amateur welder . The customer service is very very good in all ways . I also bought the tig 200 a couple months ago and thought there was something wrong with the welder....not the case , it was my 220 service wasn't hooked up right , meanwhile I called customer service and they immediately got right back to me , by that time I had fixed the problem and it also works like a dream . Very very impressed with both welders and customer service was awesome . Thank you Eastwood for you service and sweet welders !!
    Date published: 2015-06-23
    Rated 2 out of 5 by from eastwood mig welder 175 welder looked great. got ready and tried to weld and was very unhappy because welder would not weld correct. removed cover and found the main wire to cond. nut had never been tightened and was just making connection part time . this was after waiting a week longer receiving the order than was told. the location of the gas hose and power cord has a lot to be desired because they come out the back right where the bottle is and hits the bottle if you don't space it forward about 2" with the new cart I purchased with the welder
    Date published: 2015-03-04
    • 2015-08-29T15:01CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_40
    • loc_en_US, sid_10001_10001_1990789, PRD, sort_relevancy
    • clientName_jegs
    Eastwood 19016 - Eastwood Intergrip Panel Clamps
    Only $31.99

    Eastwood 13901 - Eastwood Spot Weld Kit
    Only $36.99

    Eastwood 11616 - Eastwood MIG/TIG/Plasma Multi-Unit Welding Cart
    Only $104.99

    Eastwood 12011 - Eastwood MIG-135 Welder
    Only $302.99

    See All Items You Need