Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

Eastwood 13212 - Eastwood Auto Darken Welding Helmets

Eastwood 13212 - Eastwood Auto Darken Welding Helmets
Eastwood 13212 - Eastwood Auto Darken Welding Helmets

JEGS Part Number: 352-13212

Large View Auto Darken Welding Helmet
  • Viewing area: 3.6'' x 2.6''
  • Black

    Eastwood Auto Darken Welding Helmets

    Auto darkening welding helmets contain infinitely adjustable sensitivity, delay, and shade adjustment from #9 - #13. 0.0025 per second darkening feature with robust Li-Mi battery that charges with arc and solar power.

  • Battery life is approximately 5000 welding hours
  • Features replaceable lens protectors
  • Adjustable head band
  • Features a very durable nylon constructed shell

  • Eastwood 13212

    Manufacturer's Part Number:
    Rated 5 out of 5 by from Great up-grade Just received this large view auto darken welding helmet. It is very comfortable and the large view is fantastic especially under the car.. This helmet to replaced an older auto darkening helmet with a small view that started to not darken all the way . The cost of this helmet was less than a lens replacement for my old one. The auto darkening feature works very well and I like the adjust ability. The helmet construction seams very sturdy. I would definitely recommend this helmet to anyone doing any type of welding.
    Date published: 2015-03-15
    Rated 1 out of 5 by from a great looking helmet to bad i never got to try it out, i tried adjusting the head band, the mechanism popped open, and small pieces popped out, which one was lost, also it did not open wide enough to fit over my welding cap, also the lens is wide, what good is it if it is so low, when i put the helmet on, all i saw was top o shield, where there was no view opening, a nice looking helmet, a poor design, i sent it back immediately, waiting for a refund on credit card. ik not negative or rarely complain.
    Date published: 2015-01-18
    Rated 3 out of 5 by from Okay helmet, low amp flashing The helmet is okay but I have to complaints. First, when tig welding with very low amps, 15, 20, 25, etc., I get flashed regularly. This is very annoying. Second, the helmet hinge does not stay tight. There are two knobs, one on each side and one side seems to stay tight, the other does not and I'm constantly having to re-tighten. This is a royal pain. For these reasons, I'm looking for another helmet.
    Date published: 2015-11-03
    Rated 1 out of 5 by from Only lasted a year Bought this to replace a Harbor Freight helmet. Sometimes would not auto-darken. Knob on the side of the helmet broke off. Batteries died and had to replace right after a year. Still wouldn't work right. Went back to using my HF helmet. Tried to return for a new one and customer service said it only has a one year warranty. Sorry. I wouldn't recommend this helmet.
    Date published: 2016-01-08
    Rated 5 out of 5 by from Almost as good as some high end units I have used Having been lucky enough to use some pro level helmets, this one is very good for the DIY'er. So far its been comfortable and functioned as it should, which is nice since I once used a "cheaper" auto darkening units that had a tendency to not change, which made me get my old helmet out since I couldn't trust. No issues with trusting this one.
    Date published: 2016-01-06
    Rated 4 out of 5 by from Works well but... I may not have had the helmet adjusted correctly but in order to see out of the center of the lens instead the bottom, I had to adjust the head strap across the forehead so it was just above my eyebrows in order to see in the center of the lens. Other than that, it works as described and would recommend to someone else.
    Date published: 2014-11-19
    Rated 4 out of 5 by from Good value. I like the welding helmet. I like the large viewing lens and found the darkening works very well. The only thing I don't like if the flip down knobs do not stay adjusted and require resetting a lot. I am sure I can find a way to fix this problem.
    Date published: 2015-04-17
    Rated 3 out of 5 by from Tig welding Great helmet , got fit and good price but I noticed that when I tig in tight spaces or a low amps I get flashed over and over , can't make reliable welds under thoes conditions sorry to say I mivbt have to return this item.
    Date published: 2015-01-31
    • 2016-02-09T09:54CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_14
    • loc_en_US, sid_10001_10001_1990826, PRD, sort_relevancy
    • clientName_jegs
    Eastwood 12957 - Eastwood Auto Darken Welding Helmets
    Only $10.99

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $4.69

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $1.99

    Eastwood 12562 - Eastwood Fiberglass Welding Blanket
    Only $53.99

    See All Items You Need