Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Eastwood 14099

Versa-Cut 60 Plasma Cutter 220 Volt

Eastwood 14099

352-14099

jegs shipping
FREE Shipping
Ships
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 14099 Versa-Cut 60 Plasma Cutter 220 Volt $649.99
Versa-Cut 60 Plasma Cutter
  • 220 Volt
  • 50 to 60Hz
  • 60 amp Output

  • Eastwood 14099 Details

    Plasma Cutters

    Designed to cut through steel, stainless or aluminum as thin as 24-gauge, or up to 7/8" thick with ease. Heavy duty Mosfet inverter, Internal moisture seperator, 20 foot torch and 10 foot ground cable with adjustable air pressure regualator assure long life, accurate cuts and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.

    Specifications:

    Manufacturer's Part Number:
    14099

    Eastwood's Versa-Cut Plasma Cutters easily slice through thick materials and works virtually anywhere with a 110V or 220V outlet. Eastwood designed their Plasma Cutters to make clean and fast cuts through steel, stainless or aluminum with ease. Compared to mechanical cutting, Eastwood Versa-Cut Plasma Cutters work significantly faster, and make curved or intricate cuts more precisely.

    14099 - Eastwood Versa-Cut Plasma Cutters is rated 4.7 out of 5 by 56.
    Rated 5 out of 5 by from So Far Its Amazing I have an existing thermo dynamics plasma and a acetylene torch. The thermo dynamics is a nice machine but only cuts a 1/4 inch and the acetylene is awesome but can be a pain to use in certain areas. So I wanted a larger plasma and since any name brand is 2 to 3 times the cost and still not capable of the Versa 60 I thought what the heck ill try it. I cut some 1/4 stock like nothing, then for fun grabbed an old brake rotor, rusted bad, just clamped it on turned up the juice and bam sliced it right up. Spent the next couple hours cutting material for an awesome welding cart. Clamped a straight edge on some 16 gauge and this just glided right along cutting beautiful straight lines. The long cables are great as well. Great plasma cutter!
    Date published: 2015-02-26
    Rated 5 out of 5 by from Eastwood 60 Plasma Versa Cut My 1st plasma cutter. Important to learn how to set amp/air, the right settings eliminate blow back, completes cut on 1st pass, and makes smother cut. Thicker material require slower cutting. Cuts very good on rusty metal. I've cut 1/2 inch by following a guide with the right settings and cut looked very smooth. Easy to destroy consumables with blow back. After several replacements I now use a metal drag attachment which seems to help. Eastwood guarantee for me has been exceptional. I'm just a hobby and occasional user, but at 1/2 the price of American 40 amp plasma, it far exceeded my expectations.
    Date published: 2015-03-02
    Rated 5 out of 5 by from Great Home-Shop Plasma Cutter! I bought the Versa-Cut 60 based on capacity and price. This is a great Plasma cutter for the Home Shop / Hobby - Fabrication guy. I tested the machine immediately out of the box and it worked flawlessly. I have had it for 3 weeks and have used it almost daily on carbon steel, stainless and aluminum in various thickness'. I printed out the suggested settings "chart" on the Eastwood web-site and plan to laminate it & keep it on the cart. This is a Great tool!
    Date published: 2014-12-23
    Rated 4 out of 5 by from Cuts well, easy to use I bought this because I'm restoring/rebuilding a '65 F350 with a very rusty flareside bed and I knew there was a lot of metal removal ahead of me. The unit cuts well and works well but the air pressure adjuster doesn't work and I've been unsuccessful at getting any help from Eastwood. One of the reasons I bought this over a Lincoln was the price and the fact that others had commented in reviews about how responsive Eastwood was for tech support, but this has not been my experience. As long as you can regulate your air pressure ahead of the unit its fine. Like others, mine continues to blow air after releasing the trigger, which I assume is to cool parts, not sure, minor annoyance.
    Date published: 2015-01-05
    Rated 5 out of 5 by from Cuts like a laser I bought this to replace a inexpensive Ebay plasma cutter with no warranty. It broke (leaving me with a 300 dollar paperweight) so I knew I wanted a decent warranty as well as more power so I got the Versa Cut 60, (comes with a 3 year warranty). I've had it for about three weeks and I'm really enjoying using it, made some difficult cuts at steep angles on 1" pipe but it worked great! On straight cuts with the guide it's as easy as using a magic marker that just happens to vaporize steel! It seems like it has double the power of the one I used before! I'm really liking this! As much fun as a new gun! I really feel like I can depend on this tool to make the difficult easy...
    Date published: 2015-04-28
    Rated 5 out of 5 by from Warrantee I purchased a 60 amp Versa-Cut Plasma Cutter a year ago. All of a sudden it would cut out while cutting and not ignite. I called Tech Support at Eastwood and talked to Ed. After hearing my explanation, He said he would do the paper work and have my cutter picked up by Fed-Ex and ship a new unit. Yep, it was that simple. I boxed it up and it was picked up by Fed-Ex the next day. Eight days later a new unit was delivered to my door. Absolutely the best Customer Service I have ever experienced.
    Date published: 2015-04-09
    Rated 5 out of 5 by from excellent unit Cuts wonderfully and has plenty of power. We have a miller at work and tbis thing was less expensive and runs circles around it. Consumables are better priced as well. One questionable item is that i think the plasma will activate without air pressure. This caused me to have to clean my electrode and nozzle twice before i realized what i was missing. Compressor was hooked up but was only supplying about 5 psi because it was off. The only reason in mentioned is the miller has an air detection light to tell you if there isnt sufficient air supplied....
    Date published: 2015-07-29
    Rated 5 out of 5 by from Does exactly what its advertised to do First off I want to mention that the unit came very well packed with foam and cardboard tubes so of course there was no external damage during shipment. I did test passes on 1/8, 1/4, 1/2, and a piece of 1"( I had no 7/8). It had no problem cutting through all but the 1" leaving about an 1/8 so therefore I'm certain it would sever 7/8 with no problem. My primary use will be to cut shapes from 1/4 and the occasional 1/2. The higher than competitors advertised duty cycle was a big selling point to me.
    Date published: 2015-05-06
    • y_2017, m_8, d_18, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_56
    • loc_en_US, sid_10001_10001_2436766, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List