Call Our Support Line
24 Hours / 7 Days a Week!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 14146Z

2K Ceramic Paint Satin Black 12 oz Aerosol

Eastwood 14146Z


ORMD Item - Ground Shipping Only
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 14146Z 2K Ceramic Paint Satin Black 12 oz Aerosol $22.99
2K Ceramic Paint
  • Satin Black
  • 12 oz Aerosol

  • Specifications:

    Manufacturer's Part Number:

    Professional Results from an Aerosol

    Formulated with Eastwood's proprietary nano ceramic technology to provide a durable finish, 2K Ceramic Aerosol Paint allows you to paint with the precision of a two-component coating without a paint gun! An innovative nozzle/valve has dual inner chambers to ensure the right mix ratio every time. Sprays like a gun but offers a broader pattern than conventional aerosol and no mess to clean.

    14146Z - Eastwood 2K Aero-Spray Ceramic Paint is rated 3.3 out of 5 by 12.
    Rated 5 out of 5 by from The Best Chassis Paint... Just the best you can buy and use in a spray can to match OM chassis. See pictures below. I also used it on the frame........
    Date published: 2016-07-25
    Rated 5 out of 5 by from good product i am getting ready to use this product on a third project i love how the other two projects came out very easy to use
    Date published: 2016-07-06
    Rated 5 out of 5 by from Very easy to work with I've purchased several cans it laid out really nice and blended in with existing 2k which came from quart
    Date published: 2015-06-11
    Rated 4 out of 5 by from Very durable This is a very tough paint, and it laid down flat for me (chassis black satin). I wonder if the reviewers who say it is too "textured" are shaking it long enough. It needs to be shaken thoroughly, both before and after releasing the catalyst. My only complaint is that I wish it was a deeper black. It has a bit of a blue/gray tint to it. When painted next to POR15 top coat, the POR looks like a much darker black.
    Date published: 2016-09-27
    Rated 4 out of 5 by from The jury is still out but so far, so good Used several cans of this to spray a new aftermarket subframe for my '68 Camaro. Good coverage and very controllable spray pattern. I did this in my garage with the frame up on jack stands-- masked and sprayed control arms, frame connectors and sway bar too. Excellent results at this point but the parts are yet to be installed. We'll see how it holds up. Side note: I had one can that failed to spray (admittedly it was the one that sat around all winter, waiting for the weather to break) and Eastwood replaced it immediately without question. This, along with great quality, is one of the reasons I always use Eastwood products. Four stars out of Five only because of the steep price. I bought it discounted as part of a larger order, but it was still expensive. Otherwise 5 of 5 so far.
    Date published: 2015-04-21
    Rated 4 out of 5 by from Spray gun in a can Excellent product, works just like a Spray gun. Good results. Can does get spitty sometimes
    Date published: 2015-03-17
    Rated 3 out of 5 by from Use within 48 hours I bought this to use on a group of engine bay mechanicals and was disappointed when I found out that I had to use the whole can in 48 hours. I have yet to use the paint account I have to prep ALL the parts that need painted at once.
    Date published: 2015-12-04
    Rated 3 out of 5 by from 2k Aero Satin I used this on a stubby jeep bumper and old Bronco roll bar. The last and 3rd coat of paint was almost dry on the bumper when it was knocked off the stand. Suprisingly little damage. Pretty tough paint. Sanded and patched up nicely. Downside is it took me 6 cans to do both (3 coats each). I used a urethane primer which was cheaper than the 2k. When comparing to powder coat, the powder may be a better deal but you can't patch chips easily. Not sure what I did but finish came out almost as a crinkle finish. Actually looks good but not necessarily what I expected. Not sure I'd sue this on parts requiring a finer finish.
    Date published: 2015-06-28
    • y_2017, m_12, d_17, h_1
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_US, sid_10001_10001_2817202, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List