Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Eastwood 16060Z

Rust Encapsulator 15 oz Aerosol

Eastwood 16060Z

352-16060Z

ORMD Item - Ground Shipping Only
made in usa
jegs shipping
Ships
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 16060Z Rust Encapsulator 15 oz Aerosol $19.99
Rust Encapsulator
  • 15 oz Aerosol
  • Matte Black

  • Specifications:

    Manufacturer's Part Number:
    16060Z

    Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 15 oz (net weight) aerosol can covers about 10 sq/feet. Contains no isocyanates. Heat resistant up to 400°F.

    Features
  • It's easy to use. Just remove any loose rust and wax, oil or grease. Then brush Rust Encapsulator on (if you prefer, thin up to 20% with lacquer thinner and spray)
  • It seals and stops rust and corrosion from spreading. Use over or under body fillers
  • Rust Encapsulator is a great primer for floor pans and other under-body parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane top coats (including Eastwood Chassis Black)
  • For the absolute ultimate rust remedy, first brush or spray on Eastwood Rust Converter, then prime with Rust Encapsulator


    JEGS EZ Kits are designed by JEGS professionals to ensure that you get all the correct parts you need.

  • 16060Z - Eastwood Rust Encapsulator is rated 4.6 out of 5 by 96.
    Rated 5 out of 5 by from FANTASTIC PRODUCT This is the first time I used this product Rust Encapsulator in my restoration on a 1986 Dodge D150. The driveshaft was real rusty. I sanded down the loose rust and sprayed on the R.E. I should have chosen a gray color of R.E. black on black was difficult to see. OOPS!
    Date published: 2017-06-25
    Rated 5 out of 5 by from Looks good so far.....Long term will tell. I had a small spot of rust on the underside of my Javelin's hood. I needed a spray to get to it. This seems to have done it's job but long term will be the final test. Delivery via FedEx and USPS was VERY slow.....item was shipped a few hundred miles but took well over a week and half....so don't be in a hurry!
    Date published: 2017-06-17
    Rated 5 out of 5 by from Satisfied Very pleased with this product. It was delivered in a timely manner.
    Date published: 2017-04-27
    Rated 5 out of 5 by from Seems to be a great product Seems great but only time will tell. Sprays WONDERFUL! Lays down flat and has a nice flat / semi gloss finish and primer like texture. I was very pleased. Hopefully it works as advertised for stopping the rust.
    Date published: 2016-10-15
    Rated 5 out of 5 by from Great stuff! I have restored a few older trucks that I painted with this and it came out fantastic! All around great paint.
    Date published: 2016-10-04
    Rated 5 out of 5 by from Rust Encapsulator Aerosol I have used this product many times and love it. Very easy to use and works very well.
    Date published: 2016-09-19
    Rated 5 out of 5 by from great product Always works when prepped correctly. Very convenient as a spray can for hard to reach areas.
    Date published: 2016-08-24
    Rated 5 out of 5 by from Ok stuff I got this product right on time. I have a new fender for my truck so I wanted more weather protection. The fender came primed with something. It was pretty inert as lacquer thinner and acetone wouldn't touch it. I sprayed 2 coats of the rust encapsulator on the fender and forced it to run in the weld seams. It dried as the instructions noted. In fact it was pretty smooth semi gloss black. I lightly sanded the exterior, wiped it with acetone and sprayed 2 coats of epoxy primer over the entire fender. the temperature dropped so the primer took a while to dry. I tried a small scratch test a good 24 hours later and the finish including the rust encapsulator is very hard. I'll do a wet sand with 500 grit right before I paint. It's very smooth as it is. I hope it's a number of years before I see rust again. This is Minnesota so we have all kinds of salt and chemicals on the roads in the winter. Maybe I can come back in a few years and up date this review. I give it 5 stars so far. Easy to apply and nice rattle can spray nozzles.
    Date published: 2016-08-22
    • y_2017, m_9, d_25, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_96
    • loc_en_US, sid_10001_10001_1300466, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List