Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Eastwood 19017

Pro Spotweld Drill Bit 3/8" (10mm)

Eastwood 19017

352-19017

made in usa
jegs shipping
Ships
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 19017 Pro Spotweld Drill Bit 3/8" (10mm) $28.99
Pro Spotweld Drill Bit
  • 3/8" (10mm)

  • Specifications:

    Manufacturer's Part Number:
    19017

    The Eastwood Pro Spotweld Cutter is a must have for every tool box. If you've ever wanted to make clean cuts without cutting into the bottom panel, then this bit is for you. This solid one-piece cutter is machined from M2 tool steel and will totally drill out spot welds with very little or no grinding required after. The self-centering point prevents "drill walking" and cuts fast. Extremely durable and long-lasting - shop tested at over 300 cuts without resharpening. The 3/8" diameter cutter applies to most applications. Drill at 700 - 2,000 RPM.

    19017 - Eastwood Spotweld Drill Bit is rated 2.3 out of 5 by 6.
    Rated 4 out of 5 by from Good cutter I have three of these and they work great .I use a 20v battery drill med. speed , punch first . And use a nonsilicone lube . Sharpen lightly with diamond stone .
    Date published: 2014-12-20
    Rated 4 out of 5 by from Does removes spot welds Bought to remove floor pans in resto project. Clean surface and try to center as close as possible. Use center punch. Hard to tell how deep to drill and it's easy to drill all the way through. Practice on scrap to get the feel.
    Date published: 2014-12-18
    Rated 3 out of 5 by from The double ended style works better for me. I am rebuilding the rockers on my '72 MGB-GT so have lots of spot welds to drill out. I tried both this bit and the double ended cutter and find that the latter works much better for me. This one moves around unless you use a punch or small drill bit to make a pilot mark first, it required a lot of pressure, and tended to slip in the chuck. It just didn't end up being worth the cost for me.
    Date published: 2014-11-09
    Rated 1 out of 5 by from it worked for a very short time When I got the item I was able to use it a few times then went totally I still have many more spot welds to cut out now I have to buy a new spot weld cutter.
    Date published: 2015-10-21
    Rated 1 out of 5 by from Poor quality. Didn't live up to expectations. I purchased two of the 3/8" spot weld cutters. I've used both for a total 30 cuts and they're both dull. I still have 15 cuts to make and will probably have to buy an additional cutter from a local vendor that will have replaceable blades. These cutters were a waste of money.
    Date published: 2015-01-09
    Rated 1 out of 5 by from Try something else Drilled 10 welds and that was it. After that, it was too dull to drill another. Big disappointment!
    Date published: 2014-12-25
    • y_2017, m_11, d_17, h_24
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_6
    • loc_en_US, sid_10001_10001_1355786, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List