Fathers Day
Call Our Support Line
24 Hours / 7 Days a Week!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Top Categories
All Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 19418ZP

Fast Etch 1 Gallon

Eastwood 19418ZP
Representative Image
Product images may differ from actual product appearance.


ORMD Item - Ground Shipping Only
made in usa
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 19418ZP Fast Etch 1 Gallon $29.99
Fast Etch
  • 1 Gallon

  • Eastwood 19418ZP Details

    This is not a primer. Treated surfaces should be wiped with PRE Painting Prep (352-10041Z) or thinner before priming and painting.


    Manufacturer's Part Number:

    Eastwood's Fast Etch is a specially formulated rust remover liquid that was created to meet the needs of auto restorers. It reaches even the most inaccessible areas and will quickly dissolve iron oxide completely, while leaving a zinc phosphate coating behind. Fast Etch can be sprayed, brushed or used as a parts dip liquid. It is non-toxic, non-flammable and can be reused several times. Fast Etch is also an excellent metal prep for powder coating and painting.

    19418ZP - Eastwood Fast Etch is rated 4.5 out of 5 by 16.
    Rated 5 out of 5 by from Roll Cage Paint Preparation I love this product. If you've ever tried wire brushing surface rust from a multipoint cage you've learned quickly that the process is extremely time consuming and tedious. I figured I would try this product hoping it would save me at least a little time. I simply applied the product and let it sit and it removed every trace of rust around the heavy base plates and hard to reach areas where the diagonal bars adjoin to the main hoop. I do not build cars commercially, but I will always keep this product on hand now and in the future. I no longer need my blast cabinet from what I have seen thus far.
    Date published: 2015-01-13
    Rated 5 out of 5 by from starts attacking rust instantly bought gallon of fast etch, put it in a spray bottle and sprayed it over rust on my 1967 mustang and it converts the rust to a darker color and in other areas to black. seals the rust. i used it on an area that had rust removed with evapo rust, then what was left was pits in the chrome where rust was, and i left it like that for awhile then when i received fast etch in the mail, i sprayed some on to the pits of the chrome and i can instantly see it working with small bubbles. i also sprayed it on bare sheet metal and it works good on keeping it from rusting. only bad thing is when sprayed, it smells strong and bad.
    Date published: 2015-03-06
    Rated 5 out of 5 by from Works great, but beware of spills Fast etch is expense, but it does remove heavy rust. The key to successful rust removal is time in contact with the liquid. I built wooden tanks lined with Fiberglas resin to soak parts. Sometimes for two days. Dry the parts, then wire brush them. Before painting get all of the phosphide film removed or paint won't bond well. Be careful with spills and drips. Place drop clothes, etc. under your work. This stuff is next to impossible to remove from floors if you let it dry very long. Eastwood Tech support suggested the use of acetone as a cleaning agent. It does work, but not without a lot of abrasive scrubbing.
    Date published: 2015-01-02
    Rated 1 out of 5 by from Eastwood Fast Etch Bought a gallon of this to make sure I didn't run out. First application was some rust that was under the gas tank. With tank removed, I sprayed a heavy coating and waited to rinse. After I waited the prescribed time I pressure washed and let dry. Much to my amazement, no difference! Very disappointed. I will try again with another attempt later, and if it improves I will change my rating.
    Date published: 2014-12-08
    Rated 1 out of 5 by from Slow Etch Not all it is supposed to be. Maybe too much water
    Date published: 2015-12-18
    Rated 5 out of 5 by from A must in restoration Very effective product. Don't believe any of those YouTube videos about using acidic acid (vinegar), tried that and it did nothing. Be sure to read instructions - soaking a cloth on surfaces for longer contact time is a big help. Take protective safety steps very seriously, covering yourself (goggles, hat, long sleeve shirt...) as much as possible..!
    Date published: 2015-04-07
    Rated 5 out of 5 by from Fast Etch Rust Desolver I have been restoring cars and trucks for over 30 years. I have tried everything out there for rust. By far the best and my go to rust remody is Eastwood 's Fast Etch. It works fast and complete giving a really good serfaces for primer and paints to stick to. I only buy it in gallons and use my own spray bottle to apply it. Must have in any shop!
    Date published: 2015-12-03
    Rated 5 out of 5 by from Great product The cross members on my 2006 Silverado rusted out. I replaced the cross members cleaned the rust of the rest of the frame and various brackets and hardware. I purchased a more expensive product which did not last long and I needed more. I gave fast etch a try and it works just as good and is a lot cheaper.
    Date published: 2014-10-31
    • y_2017, m_6, d_26, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_16
    • loc_en_US, sid_10001_10001_1300471, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need