Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 20279

MIG 250 Welder Includes: MIG Unit/Gun

Eastwood 20279


jegs shipping
FREE Shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 20279 MIG 250 Welder Includes: MIG Unit/Gun $849.99
MIG 250 Welder
  • MIG Unit/Gun
  • Ground Cable & Clamp
  • Gas Regulator & Hose
  • 120VAC To 240VAC Cord
  • 2 Pound Spool Of MIG Wire
  • Instruction Manual

  • Eastwood 20279 Details

    MIG Welder

    Use standard 120VAC, 20 amp 50 or 60Hz power. Welds up to 140 amps on 120VAC. The mig 250 will also use standard 240VAC, single phase 50 or 60Hz power. Unit will weld up to 250 amps with 240 VAC input. Use a NEMA 650 receptacle and a 50 amp dedicated line for this machine. This welder fits on the Eastwood multi unit welding cart (11616).


    Manufacturer's Part Number:

    The Eastwood MIG 250 Welder was designed from the ground up to be a powerful, easy to use and inexpensive welder. It is very lightweight and one of the only truly portable units on the market today. With its state of the art inverter technology, it weighs half as much as similar welders and costs half as much too. But it still delivers all the power you will ever need to weld steel up to a 1/2 inch thick and aluminum up to 1/4 inch thick, with a 60% duty cycle at its full 250 amp setting. Plus, with the efficiency of the inverter and the ability to run on 120v or 240v, you can easily take it to the race track or job site and run it off a generator. The MIG 250 also has infinite adjustability of both its voltage and wire feed speed settings, can take both 4 inch and 8 inch diameter spools and feed steel, stainless or flux core wire from .023" to .045". If you add the optional spool gun you can weld aluminum like a pro too. Features:

    • 120V or 240V Powered
    • Infinitely Adjustable 30-250 Amp Welding Range
    • 60% Duty Cycle At 250 Amp Setting
    • Weighs Just 66 Pounds
    • 10 Foot Torch Cable
    • 10 Foot Ground Cable
    • State Of The Art Inverter Technology
    • Uses 4" or 8" Wire Spool
    • Optional Spool Gun For Aluminum Wire
    • Binzel A2/24 Torch Uses Commonly Available Consumable

      JEGS Easy Kits are designed by JEGS high performance racing professionals to help you get all the performance parts you need for your race car, hot rod or truck.

    20279 - Eastwood MIG Welder 250 Amp is rated 5.0 out of 5 by 1.
    Rated 5 out of 5 by from Best Bang for your buck This welder flat out kicks some but! Only took 10 minutes from time I opened it to welding my first bead. Seems to if great quality and welds Better than my Miller and Lincoln. The 60% duty cycle is a plus. Don’t hesitate to buy!
    Date published: 2018-02-21
    • y_2018, m_3, d_17, h_2
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_3165767, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Can this unit be run off of a generator.

    Asked by: john215
    Yes, it would need to be at least 3000 watts because this generator is rated to use 20 amps.
    Answered by: Rusty B
    Date published: 2017-10-18

    I see on the manual the measurements are 30x 15x19.3.  My question is, is that HxWxL or LxWxH?

    Asked by: Freakenmooly
    30'' high 15'' wide 19.3 deep
    Answered by: SteveM
    Date published: 2017-09-27
    • y_2018, m_3, d_17, h_2CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_2
    • loc_en_US, sid_10001_10001_3165767, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need