Jegs Free Catalog
Orders Over $95
Same Day Shipping Before 11 PM ET
My Cart
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 51655Z

Seam Sealer Cartridge 10.1 Ounces

Eastwood 51655Z


ORMD Item - Ground Shipping Only
made in usa
jegs shipping
Eastwood 51655Z Seam Sealer Cartridge 10.1 Ounces $15.99
Seam Sealer Cartridge
  • 10.1 Ounces
  • Black

  • Specifications:

    Manufacturer's Part Number:

    After stripping a car or repairing a panel, seam sealer should be replaced to preserve your work and guard against the elements. Eastwood Seam Sealer (black or beige) leaves a factory-like finish and does not crack, harden, or sag. Seals cracks and crevices, waterproofs, and insulates. Sealer tack dries in 15 minutes (can be painted after an hour), adheres to paint, and remains flexible. Paintable in 30 minutes, Brush-On Sealer dries gray. Use on firewalls, trunk seams, fender extensions, taillight openings, etc.

  • Stays flexible; won't crack
  • Waterproofs and insulates
  • For firewalls, floor pans, trunk seams, fender extensions, taillight openings
  • Applies easily with your standard caulking gun

  • 51655Z - Eastwood Seam Sealer is rated 4.2 out of 5 by 13.
    Rated 5 out of 5 by from Seam Sealer for that OEM look. I have used several tubes of this sealer so far, matching the OEM sealer applications. I ground out the original hard and dry sealers all over our project 67 Caddy. Pumped in beads (no more then 12" at a time) and fingered them down to match the original where applicable. Removed the original material between the inner and hood stiffeners and the skin and pumped it in the center holes just like the factory and it went in and came out the surrounding four holes just like the OEM process. The hood is now firm and quite, no tinny sounds when you tap on it and no swelling or bulges. Works perfectly, looks correct, sticks well and has the right firmness vs flex. Excellent product.
    Date published: 2015-01-07
    Rated 2 out of 5 by from Disappointed in Seam Sealer Unlike 3M seam sealer, this product went on very stringy and did not flow into/onto the seams. Used a small brush to help level the material and had hoped the seam sealer would level out smoothly and it did not. Will not use this product again. Although the 3M seld-leveling seam sealer is more expensive it would be well worth the extra money to invest a better product for better results.
    Date published: 2015-01-26
    Rated 5 out of 5 by from Eastwood Seam Sealer I have used this product from Eastwood several times and it is a high quality product. It is exactly like the material used in the assembly of vehicles in the United States. I not only use it during vehicle restorations but also for other projects where a professional bond is needed, especially where moisture is a concern.
    Date published: 2015-11-22
    Rated 4 out of 5 by from Good Stuff.... I have used Eastwood's Seam Sealer many times. Recently I ran out and bought another brand at a local auto supply store....big mistake! Eastwood's seam sealer is still messy to apply, but it is a much better product as it never cracks and takes paint better. It is long lasting.
    Date published: 2016-05-05
    Rated 5 out of 5 by from Loved it I read the reviews for this product and was a little intimidated. But having the help of a buddy this stuff went on great it worked beautifully. I used rubber gloves to smooth it out and fill the gaps the job turned out perfect. This stuff is awesome. Thanks Eastwood.
    Date published: 2016-09-20
    Rated 5 out of 5 by from Good stuff, easy to apply Says ready to paint in an hour, but is still very soft at that point. Hardens very well overnight . Easy to apply . Just like caulking. Use a nitrile glove and can easily smooth out with finger.
    Date published: 2016-09-30
    Rated 2 out of 5 by from Good for small gaps under 1/16 inch Does not work very well for gaps larger than 1/16 inch. On large gaps the sealer stays mushy. On gaps smaller than 1/16 inch, works pretty well.
    Date published: 2015-02-09
    Rated 5 out of 5 by from Works as advertised! I used this product for the seams on my C3 Corvette floorboards and it worked as advertised. Highly recommend for any automotive projects!
    Date published: 2015-01-14
    • y_2017, m_4, d_30, h_7
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_13
    • loc_en_US, sid_10001_10001_1355795, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need