Eastwood 51676 - Eastwood Rust Converter
Manufacturer's Part Number:
Rated 2 out of 5 by 48 chev truck from Misleading Product I ordered rust converter after reading all the product descriptions to try and trap some surface rust underneath my truck cab. After applying the product I noticed that it wasn't adhering to most of the area. I contacted Eastwood and they said the product only works on deep, heavy rust - which is not a part of the product description. So they advised to sand off the product and use rust encapsulator. So this product does not work on all rust, just heavy rust and encapsulator should have been used int he first place.
Date published: 2015-06-17
Rated 5 out of 5 by Chevelless396 from Works Great I would recommend this product Rust Converter to anyone who is doing a restoration project it has saved me several hours of wire brushing on my 66 Chevelle front clip and frame. This product works Great !!! And the girl at the desk was very help full with my order. At my car club we have a saying GOOD MANAGEMENT STARTS WITH THE TOP DOWN. The guys in charge are doing a great job you can tell by the employees they hire. Thanks Keep up the good work.
Date published: 2015-06-02
Rated 4 out of 5 by Hoots from Better follow the directions or else! This is the 3rd or 4th quart bottle I've used in restoration projects. It does work on properly prepared metals BUT if you apply it to rust as they claim you can, you then will trap any moisture between the new barrier and the bad metal and she will continue to rust all over again. Take it down to as much bare metal as possible but do not apply it to rust!
Date published: 2015-05-29
Rated 5 out of 5 by Kevin65 from Seems to work just great I have used this in hard to get to areas, after removing as much rust as possible. After curing, the area gets coated with rust encapsulated and it seems to be holding up quite well.
Date published: 2015-05-02
Rated 5 out of 5 by joe bonn from eastwood rust converter Used it on the frame of pick up truck. Took a wire brush to it first though. Turned the frame black. Time will tell how well it works. I plan to paint over it with the encapsulter.
Date published: 2015-07-19
Rated 5 out of 5 by bvieages from Good Product Used this on my trailer before replacing the planking along with the encapsulator and it worked very well. Had to leave the trailer outdoors for a few months and no return of rust
Date published: 2015-01-09
Rated 1 out of 5 by Scott131 from Scott I did not have the same good results as other people in their reviews. There was very little rust conversion after applying this to wire brush cleaned metal.
Date published: 2014-11-04
Rated 3 out of 5 by chuck7354 from My review of Eastwoods Rust converter I bought this product for a 1936 Chevy that I am building for my 81 year old father. I had high hopes but it didn't seem to work for me.
Date published: 2014-10-26