Edelbrock 1504 - Edelbrock Performer/Victor-X Honda Turbo Kit
Edelbrock #350-1504Victor X Turbo Kit |
||||
|
|
||||
|
||||
|
|
||||
Edelbrock 1504 - Edelbrock Performer/Victor-X Honda Turbo Kit Details
Edelbrock Victor-X Turbo Kits
60% More Horsepower At The Wheels!!! Edelbrock has engineered a complete and easy to install Turbo kit. That means, no more having to swap motors before you can even bolt-on a turbo kit. It also means 170 HP at the wheels, 65 HP over stock, and 140 ft/lbs of torque at 6-lbs to 7-lbs of boost! The Edelbrock turbo kit is centered around a Garrett T28 Ball Bearing Turbocharger that comes pre-assembled as one unit with a Ni-resist cast exhaust manifold and a cast iron exhaust elbow. The Edelbrock exhaust manifold and elbow are designed for maximum flow at high velocity for quicker turbo spool-up. Boost is sent through ceremic-coated steel tubing to an over-sized Spearco air-to-air intercooler and routed into the engine through an Edelbrock Performer X intake manifold. Four extra fuel injectors are already plumbed into the intake to add fuel when the included electronic controller senses boost conditions. Off-throttle pressure is managed through a Tial Blow-Off Valve. This Edelbrock turbo kit is so complete that it includes all the needed plumbing, oil supply adapter, pre-assembled oil, water and fuel lines (no adapters or hose clamps), gaskets, fasteners and fittings to make this the most complete kit on the market. It also includes a pillar mounted boost gauge so that you can see the new found power for yourself! Click Here To See Turbo Kit Installed.
PERFORMER X STREET LEGAL TURBO KITS
HONDA STREET LEGAL TURBO KITS
Street legal and easy to install, these kits include everything you need to give your car turbocharged performance. No additional tuning is required when used on otherwise stock engines. The Garrett turbo comes preassembled as one unit with a Ni-resist cast exhaust manifold and elbow, inlet oil and water lines for the simplest possible installation. The Garrett ball bearing turbo spools up fast, works with pump gas and still makes over 60% more power than stock. The Edelbrock exhaust manifold and elbow are designed for maximum flow at high velocity.
VICTOR X TURBO KITS
HONDA OPEN TRACK TURBO KITS
Designed for competition, these Open Track Turbo Kits can be configured for high-boost applications using the engine management system of your choice. They include the same hardware as Performer X turbo kits, but do not include the ECU or secondary fuel system. Match with a programmable competition engine management system. Using components such as 8.5:1 pistons, aftermarket connecting rods, modified heads and performance cams, power levels of 300-400 HP (Crankshaft) are possible @ 15-18 PSI boost.
