Edelbrock 21011 - Edelbrock Performer Intake Manifolds for Chevy

Edelbrock 21011 - Edelbrock Performer Intake Manifolds for Chevy

Edelbrock#350-21011

Performer Intake Manifold
  • Polished Finish
  • SB-Chevy 262-400ci 1955-86
  • 4-bbl Spread-Bore Carb Flange (non-EGR)
  • Idle-5500 RPM Range
  • 50-State Legal
    		•
    $319.99 Ships
    Installation Instructions for Edelbrock 21011 - Edelbrock Performer Intake Manifolds for Chevy


    Edelbrock 21011 - Edelbrock Performer Intake Manifolds for Chevy

    Edelbrock 21011 - Edelbrock Performer Intake Manifolds for Chevy Details

    Chevy 262-400ci Small Block V8

  • Designed for street 1955-86 small block Chevy 262-400
  • Port Exit Dimensions: 1.14" x 1.88"
  • Manifold Height: (A) 3.50", (B) 4.60"; Carb pad height = 4.05'' Click here to determine carburetor pad height
  • Recommended Intake Gasket: JEGS p/n 555-210001
  • Stock replacement/street-legal part for 302, 327, and 350 with OE 4-bbl or Edelbrock Carburetor #350-1400 on 1966-73 non-CA passenger cars & 1966-83 trucks/Suburbans except stock-equipped EGR (NOTE: #350-3701 is stock replacement/street-legal for 1972-86 305, 350, and 400 with OE 4-bbl or Edelbrock Carb #350-1400 and 1981-86 GM corporate 350 engines)
  • Fits 1987-Up stock aluminum heads (does not fit 1987-Up cast iron or Chevrolet Bow Tie heads)
  • Accepts late model choke, water neck, AC, alternator, and HEI (provisions to add oil fill tube)
  • Includes choke plate #350-8901
  • Use EGR adapter #350-8035 to adapt clamp-on EGR valve

    Carb Recommendations/Notes

  • OE 4-bbl Carburetor
    Provision for evaporative canister
    Factory cruise control accepted
    Uses automatic divorced choke rod #350-9171 and throttle bracket #350-8036 for 1972-78 vehicles

  • Edelbrock 600 cfm Performer Carburetor #350-1400
    Can work with EGR system
    Provision for evaporative canister
    Factory cruise control accepted
    Uses throttle bracket #350-8036 for 1972-78 vehicles

  • Edelbrock 600 cfm Performer Carburetor #350-1405
    Manual choke only
    Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
    Factory cruise control accepted
    Uses throttle bracket #350-8036 for 1972-78 vehicles

  • Edelbrock 600 cfm Performer Carburetor #350-1406
    Factory cruise control accepted
    Uses throttle bracket #350-8036 for 1972-78 vehicles

  • Edelbrock 650 cfm Thunder Series AVS Carburetor #350-1805
    Manual choke only
    Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
    Factory cruise control accepted
    Uses throttle bracket #350-8036 for 1972-78 vehicles

  • Edelbrock 650 cfm Thunder Series AVS Carburetor #350-1806
    Factory cruise control accepted
    Uses throttle bracket #350-8036 for 1972-78 vehicles

    • Edelbrock 21011 - Edelbrock Performer Intake Manifolds for Chevy

    Performer Intake Manifolds have a patented runner design that delivers outstanding performance, crisp throttle response, and improved torque over a wide RPM range.

    Features:
  • Dual plane low-rise design with 180° firing order
  • Idle-5500 RPM for most manifolds listed
  • 4-barrel square or spread bore carb flange as applicable
  • Available in As-Cast, Polished or EnduraShine finishes
  • Most are 50-state legal when used with correct carburetor in correct application

    JEGS Easy Kits are designed by JEGS professionals so you get all the parts you need. Each kit includes:
  • Performer Intake Manifold
  • Intake Bolts & Gaskets
  • Carburetor Studs & Gaskets
  • Tube of Blue Gasket Sealer

    • Edelbrock 350-21011

    Engine Make/Size
    Chevy Small Block (262-400)
    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    Without EGR
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Accessories
    - Items You May Need