FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2101PK4 - Edelbrock Performer Power Packages

Edelbrock 2101PK4 - Edelbrock Performer Power Packages

Edelbrock#350-2101PK4

Performer Power Package
Intake Manifold, Carburetor and Camshaft Kit
  • Small Block Chevy 400ci 1968-80
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm
    50-state legal

    Edelbrock 2101PK4 - Edelbrock Performer Power Packages Details

    Chevy Small Block Performer Power Packages 1968-80 400ci

  • Designed for street 1968-80 400ci and 1955-86 262-350ci Chevrolet small-block V8s.
  • Not for 1987 and later cast iron or Chevy Bowtie heads.
  • Will fit 1987 and later stock aluminum heads.
  • Has provisions to add oil fill tube.
  • Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I.
  • This intake is a stock replacement/street legal part for 302, 327 and 350ci V8s with OEM or Edelbrock (350-1400) 4-bbl. carb.; 1966-72 (1973 non-California) passenger cars, 1966-83 trucks and Suburbans; except stock equipped EGR. Intake p/n 350-3701 is stock replacement/street legal part for 305, 350 and 400 V8s with OEM 4-bbl. or Edelbrock p/n 350-1400 carb. 1972-86 and GM corporate engines with 350 V8s; 1981-86.

    Power Package includes matching:

  • Performer Intake Manifold 350-2101
  • Edelbrock Performer 600cfm Carburetor 350-1406
  • Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters 350-2103

    Installation Notes:

  • Port exit dimensions: 1.14'' x 1.88''
  • Recommended intake gasket: Edelbrock 350-7201
  • Manifold height: (A) 3.50'' , (B) 4.60''; Carb pad height = 4.05''
  • View Manifold ''A/B'' Measurement Guide.
  • Use EGR adapter 350-8035 to adapt clamp-on EGR valve.
  • Choke plate 350-8901 is included.

    Carburetor Recommendations:

    OEM Rochester Quadrajet 4-bbl.

  • carb will work with non-EGR system
  • carb has provision for evaporative canister
  • carb acceptable to factory cruise control
  • use Automatic Divorced Choke Rod 350-9171 and throttle bracket 350-8036 for 1972-78 vehicles

    Edelbrock Performer 600cfm Carburetor 350-1400.

  • carb will work with EGR system
  • carb has provision for evaporative canister
  • carb acceptable to factory cruise control
  • use throttle bracket 350-8036 for 1972-78 vehicles

    Edelbrock Performer 600cfm Carburetor 350-1405.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister
  • requires 350-8008 or 350-8024 stud, nut & washer kit
  • carb acceptable to factory cruise control
  • carb has manual choke only
  • use throttle bracket 350-8036 for 1972-78 vehicles

    Edelbrock Performer 600cfm Carburetor 350-1406.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister
  • carb acceptable to factory cruise control
  • use throttle bracket 350-8036 for 1972-78 vehicles

    Edelbrock Thunder Series AVS 650cfm Carburetor 350-1805.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister
  • requires 350-8008 or 350-8024 stud, nut & washer kit
  • carb acceptable to factory cruise control
  • carb has manual choke only
  • use throttle bracket 350-8036 for 1972-78 vehicles

    Edelbrock Thunder Series AVS 650cfm Carburetor 350-1806

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister
  • carb acceptable to factory cruise control
  • use throttle bracket 350-8036 for 1972-78 vehicles

    Cam Specs:

  • Designed for optimum torque from the low-end to the mid-range.
  • They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
  • You can expect a major improvement in throttle response and torque.

    *Note: 50-state legal for 1968-80 400ci Small Block Chevy.

    Duration Advertised:288° Intake / 288° Exhaust
    Duration @ .050'' Lift:214° Intake / 214° Exhaust
    Valve Lift:.442'' Intake / .442'' Exhaust
    Lobe Separation Angle:112°
    Open/Close @.050'' Cam Lift:Intake - 0° ATDC (opens) / 34° ABDC (closes)
    Exhaust - 44° BBDC (opens) / 10° BTDC (closes)

  • Edelbrock 2101PK4 - Edelbrock Performer Power Packages

    Proven Performance With No Guesswork!

    The Edelbrock Performer Power Packages are designed for stock engines and significantly increase performance, fuel economy while lowering exhaust emissions. These packages provide incredible power from idle to 5500 RPM for your daily commute, towing, passing or uphill climbs in your car, truck, van or recreational vehicle. The main components of these packages include intake manifolds, carburetors and camshafts. Edelbrock also offers cylinder heads that match to optimize performance.

    For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with emissions equipment compatibility. Performer Multi-Point EFI Systems, camshafts and cylinder heads are also available to increase performance even further on GM vehicles originally equipped with throttle body injected V8's.

    Fel-Pro 1205 - Fel-Pro Intake Manifold Gaskets
    Only $15.99

    Mr. Gasket 5820 - Mr. Gasket Intake Manifold Gasket Sets
    Only $23.99

    Edelbrock 7201 - Edelbrock Intake Manifold Gaskets
    Only $19.99

    JEGS Performance Products 210001 - JEGS Intake Manifold Gaskets
    Only $23.99


    See All Items You Need