Power Package includes matching:
Performer Intake Manifold p/n 350-2104,
Edelbrock Performer 600cfm Carburetor p/n 350-1406,
Carburetor Adapter Plate p/n 350-2732.
Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters p/n 350-2102. Designed for street 262-400ci Chevy V8s with 1987-95 cast iron heads with canted center bolt holes. This intake is a stock replacement/street legal part for 302, 327, 350ci V8s with OEM 4-bbl. carb except stock equipped EGR. Accepts late-model waterneck, air-conditioning, alternator, H.E.I. and has rear water crossovers. This intake does accept exhaust-heated chokes.
Note: For 1987-95 engines with stock aluminum heads use intake manifold p/n 350-2101. Will not fit Bowtie or LT1 heads.
Installation Notes:
Port exit dimensions: 1.14'' x 1.88''Manifold height: (A) 3.50'' , (B) 4.60''
Click here to determine carburetor pad height.Includes choke plate p/n 350-890150-State legal only on vehicles equiped with factory non-EGR.Carburetor Recommendations:
OEM 4-bbl. (pre-1981 only)
carb will work with non-EGR systemcarb has provision for evaporative canistercarb acceptable to factory cruise controlEdelbrock Performer 600cfm Carburetor p/n 350-1405.
carb will work with non-EGR system carb has no provision for evaporative canister, requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kitcarb acceptable to factory cruise control.carb has manual choke only.use throttle bracket p/n 350-8036 for 1972-78 only.Edelbrock Performer 600cfm Carburetor p/n 350-1406.
carb will work with non-EGR system carb has no provision for evaporative canister, carb acceptable to factory cruise control.use throttle bracket p/n 350-8036 for 1972-78 only.Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.
carb will work with non-EGR system carb has no provision for evaporative canister, requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kitcarb acceptable to factory cruise control.carb has manual choke only.use throttle bracket p/n 350-8036 for 1972-78 only.Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
carb will work with non-EGR system carb has no provision for evaporative canister, carb acceptable to factory cruise control.use throttle bracket p/n 350-8036 for 1972-78 only. Camshaft Specs:
*Note: 50-state legal for 1957-86 SB-Chevy.
Designed for optimum torque from the low-end to the mid-range. They are smooth idling cams for dailey drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque.
| Duration Advertised: | 280° Intake / 295° Exhaust |
| Duration @ .050'' Lift: | 204° Intake / 214° Exhaust |
| Valve Lift: | .420'' Intake / .442'' Exhaust |
| Lobe Separation Angle: | 112° |
| Open/Close @.050'' Cam Lift: | Intake - 5° ATDC (opens) / 29° ABDC (closes) Exhaust - 44° BBDC (opens) / 10° BTDC (closes) |