Free Shipping on Performance Auto Parts            Order by 11 PM EST for Same Day Shipping!

Edelbrock 2156 - Edelbrock Performer Manifolds for Pontiac

Edelbrock 2156 - Edelbrock Performer Manifolds for Pontiac

Edelbrock#350-2156

Performer Pontiac Intake Manifold
  • Pontiac 326-455ci
  • 4-bbl Spread-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm

    Edelbrock 2156 - Edelbrock Performer Manifolds for Pontiac Details

    Pontiac 326-455ci V8

    Designed for 1965-79 street 326-455ci Pontiac V8s (except Ram Air V and 265/301 V8's). Provides great throttle response for performance you can feel. This intake manifold is for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl. carb 1966-72 (1973 non-CA) except stock equipped EGR. (Intake manifold p/n 350-3756 is for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl carb. 1973-79 with EGR.)

    Installation Notes:

  • Port exit dimensions: 1.06'' x 1.92''
  • Manifold height: (A) 5.50'' , (B) 6.60''
  • Carb Pad Height: 6.05''
    Click here to determine carburetor pad height.
  • Recommended intake gasket is Edelbrock p/n 350-7280
  • For 1968-71 use p/n 350-8015 throttle bracket
  • For Trans-Am use OEM 4-bbl carb for Shaker Hood clearance.
  • Choke plate included.
  • HEI will clear

    Carburetor Recommendations:
    OEM 4-bbl. carburetor

  • carb will work with non-EGR system
  • carb has provision for evaporative canister
  • carb acceptable to factory cruise control

    Edelbrock Performer 600cfm Carburetor p/n 350-1405,
    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805,
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit
  • carb has manual choke only.
  • use square-bore to spread-bore carburetor adapter plate p/n 350-2732

    Edelbrock Performer 600cfm Carburetor p/n 350-1406,
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • use square-bore to spread-bore carburetor adapter plate p/n 350-2732

    Edelbrock Performer 750cfm Carburetor p/n 350-1411.
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit
  • use square-bore to spread-bore carburetor adapter plate p/n 350-2732

  • Edelbrock 2156 - Edelbrock Performer Manifolds for Pontiac

    IDLE-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-2156

    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    Without EGR
    Engine Make/Size
    Pontiac 326-455
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Items You May Also Consider
    Only $513.99
    Order Today
    Ships 01/06/15
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 28030 - JEGS RTV Silicone Gasket Maker
    Only $5.99

    JEGS Performance Products 83205 - JEGS Intake Manifold Bolts
    Only $9.99

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $4.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $5.99


    See All Items You Need