Power Package includes matching:
Performer Intake Manifold p/n 350-2176,
Edelbrock Performer 600cfm Carburetor p/n 350-1406,
Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters p/n 350-2177. Designed for street 318-340-360ci Chrysler V8s. This intake manifold is a stock replacement/street legal part for 318-360ci V8s with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. (Intake manifold p/n 350-3776 is a stock replacement/street legal part for same V8's with OEM 4-bbl carb; 1972-87.) This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.
Installation Notes:
Port exit dimensions: .97'' x 1.95'' Manifold height: (A) 4.13'' , (B) 5.13''
Click here to determine carburetor pad height. Carburetor Recommendations:
OEM 4-bbl. carburetor
carb will work with non-EGR system carb has provision for evaporative canister carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans carb acceptable to factory cruise control Edelbrock Performer 600cfm Carburetor p/n 350-1405.
carb will work with non-EGR system adapter for this carb supplied with manifold carb has no provision for evaporative canister requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans carb acceptable to factory cruise control. carb has manual choke only. use throttle lever adapter p/n 350-1481 for 1966-later vehicles. Edelbrock Performer 600cfm Carburetor p/n 350-1406.
carb will work with non-EGR system adapter for this carb supplied with manifold carb has no provision for evaporative canister carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans carb acceptable to factory cruise control. use throttle lever adapter p/n 350-1481 for 1966-later vehicles. Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.
carb will work with non-EGR system adapter for this carb supplied with manifold carb has no provision for evaporative canister requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans carb acceptable to factory cruise control. carb has manual choke only. use throttle lever adapter p/n 350-1481 for 1966-later vehicles. Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
carb will work with non-EGR system adapter for this carb supplied with manifold carb has no provision for evaporative canister carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans carb acceptable to factory cruise control. use throttle lever adapter p/n 350-1481 for 1966-later vehicles. Camshaft Specs:
Designed for optimum torque from the low-end to the mid-range. They are smooth idling cams for dailey drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque.
Note: Not for 1985 and later engines with roller lifters.
Not legal for sale or use on pollution controlled vehicles.
| Duration Advertised: | 270° Intake / 270° Exhaust |
| Duration @ .050'' Lift: | 204° Intake / 204° Exhaust |
| Valve Lift: | .420'' Intake / .420'' Exhaust |
| Lobe Separation Angle: | 110° |
| Open/Close @.050'' Cam Lift: | Intake - 4° ATDC (opens) / 28° ABDC (closes)
Exhaust - 36° BBDC (opens) / 12° BTDC (closes) |
VIEW CART
