FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 21861 - Edelbrock Performer Manifolds for Chrysler

Edelbrock 21861 - Edelbrock Performer Manifolds for Chrysler

Edelbrock#350-21861

Performer 383 Intake Manifold
  • Chrysler 361-400ci
  • 4-bbl Square Bore Carb Flange (EGR/Non-EGR)
  • Idle-5500 rpm
  • Polished Finish
    • Fits Applications:
    • 1966-1978
      CHRYSLER
      1958-1978
      DODGE
      1966-1978
      PLYMOUTH
    • Click to see All

    Edelbrock 21861 - Edelbrock Performer Manifolds for Chrysler Details

    Chrysler 361-400ci V8

    Designed for street 361-383-400ci Chrysler V8s that measure 7.75'' across block. For EGR applications, This is for 400 V8s with OEM 4-bbl. carb.; 1972-78. For non-EGR applications, This is for 361-383-400 V8s with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. May be used with OEM or aftermarket carbs.

    Installation Notes:

  • Port exit dimensions: 1.14'' x 2.12''
  • Recommended Intake Gaskets: JEGS p/n 555-210500
  • Manifold height: (A) 3.65'' , (B) 4.35''
    Click here to determine carburetor pad height.

    Carburetor Recommendations:
    OEM 4-bbl. carburetor

  • carb will work with non-EGR system
  • carb will work with EGR system
  • adapter for this carb supplied with manifold
  • carb has provision for evaporative canister
  • carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans
  • carb acceptable to factory cruise control

    Edelbrock Performer 600cfm Carburetor p/n 350-1406.
    Edelbrock Performer 750cfm Carburetor p/n 350-1411
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813

  • carb will work with non-EGR system
  • adapter for this carb supplied with manifold
  • carb has no provision for evaporative canister
  • carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or >p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans
  • carb acceptable to factory cruise control.
  • use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

    Edelbrock Performer 750cfm Carburetor p/n 350-1407.
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812

  • carb will work with non-EGR system
  • adapter for this carb supplied with manifold
  • carb has no provision for evaporative canister
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans
  • carb acceptable to factory cruise control
  • carb has manual choke only
  • use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

  • Edelbrock 21861 - Edelbrock Performer Manifolds for Chrysler

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-21861

    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    With EGR
    Emission
    Without EGR
    Engine Make/Size
    Mopar 361-400
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    Edelbrock 1406 - Edelbrock Performer Carburetors
    Only $313.99

    Edelbrock 4491 - Edelbrock Signature Valve Covers
    Only $51.99

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99


    See All Items You Need