FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2186PK - Edelbrock Performer Power Packages

Edelbrock 2186PK - Edelbrock Performer Power Packages

Edelbrock#350-2186PK

Performer Power Package
Intake Manifold, Carburetor and Camshaft Kit
  • Big Block Chrysler/Mopar B-Series 361-400ci
  • 4-bbl Spread-Bore Carb Flange (EGR/non-EGR)
  • Idle-5500 rpm

    Edelbrock 2186PK - Edelbrock Performer Power Packages Details

    Big Block Chrysler/Mopar Performer Power Packages

  • Designed for street 361-383-400ci Big Block Chrysler/Mopar B-Series V8s that measure 7.75'' across block.
  • For EGR applications, This is for 400 V8s with OEM 4-bbl. carb.; 1972-78.
  • For non-EGR applications, This is for 361-383-400 V8s with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR.
  • May be used with OEM or aftermarket carbs.

    Power Package includes matching:

  • Performer Intake Manifold 350-2186
  • Edelbrock Performer 750cfm Carburetor 350-1411
  • Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters 350-2192

    Installation Notes:

  • Port exit dimensions: 1.14'' x 2.12''
  • Recommended intake gasket: Edelbrock 350-7225
  • Manifold height: (A) 3.65'' , (B) 4.35'', measured to engine block; Carb pad height = 4.00''
  • View Manifold ''A/B'' Measurement Guide.

    Carburetor Recommendations:

    OEM 4-bbl. carburetor

  • carb will work with non-EGR system
  • carb will work with EGR system
  • adapter for this carb supplied with manifold
  • carb has provision for evaporative canister
  • carb requires automatic transmission rod extension kit 350-8003 for 1/4'' rod or 350-8004 for 5/16'' rod.
  • Also use transmission kick-down linkage adapter kit 350-8022 for 1977 vans
  • carb acceptable to factory cruise control

    Edelbrock Performer 600cfm Carburetor 350-1406.
    Edelbrock Performer 750cfm Carburetor 350-1411
    Edelbrock Thunder Series AVS 650cfm Carburetor 350-1806
    Edelbrock Thunder Series AVS 800cfm Carburetor 350-1813

  • carb will work with non-EGR system
  • adapter for this carb supplied with manifold
  • carb has no provision for evaporative canister
  • carb requires automatic transmission rod extension kit 350-8003 for 1/4'' rod or 350-8004 for 5/16'' rod.
  • Also use transmission kick-down linkage adapter kit 350-8022 for 1977 vans
  • carb acceptable to factory cruise control.
  • use throttle lever adapter 350-1481 for 1966-later vehicles.

    Edelbrock Performer 750cfm Carburetor 350-1407.
    Edelbrock Thunder Series AVS 800cfm Carburetor 350-1812

  • carb will work with non-EGR system
  • adapter for this carb supplied with manifold
  • carb has no provision for evaporative canister
  • requires 350-8008 or 350-8024 stud, nut & washer kit
  • carb requires automatic transmission rod extension kit 350-8003 for 1/4'' rod or 350-8004 for 5/16'' rod.
  • Also use transmission kick-down linkage adapter kit 350-8022 for 1977 vans
  • carb acceptable to factory cruise control
  • carb has manual choke only
  • use throttle lever adapter 350-1481 for 1966-later vehicles.

    Camshaft Specs:

  • Designed for optimum torque from the low-end to the mid-range.
  • They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
  • You can expect a major improvement in throttle response and torque.

    Note: For 1968 & later engines. Not legal for sale or use on pollution controlled motor vehicles.

    Duration Advertised:270° Intake / 280° Exhaust
    Duration @ .050'' Lift:204° Intake / 214° Exhaust
    Valve Lift:.420'' Intake / .442'' Exhaust
    Lobe Separation Angle:112°
    Open/Close @.050'' Cam Lift:Intake - 5° ATDC (opens) / 29° ABDC (closes)
    Exhaust - 44° BBDC (opens) / 10° BTDC (closes)

  • Edelbrock 2186PK - Edelbrock Performer Power Packages

    Proven Performance With No Guesswork!

    The Edelbrock Performer Power Packages are designed for stock engines and significantly increase performance, fuel economy while lowering exhaust emissions. These packages provide incredible power from idle to 5500 RPM for your daily commute, towing, passing or uphill climbs in your car, truck, van or recreational vehicle. The main components of these packages include intake manifolds, carburetors and camshafts. Edelbrock also offers cylinder heads that match to optimize performance.

    For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with emissions equipment compatibility. Performer Multi-Point EFI Systems, camshafts and cylinder heads are also available to increase performance even further on GM vehicles originally equipped with throttle body injected V8's.

    Fel-Pro 1214 - Fel-Pro Intake Manifold Gaskets
    Only $25.99

    Mr. Gasket 302 - Mr. Gasket Intake Manifold Gasket Sets
    Only $18.99

    Mr. Gasket 5841 - Mr. Gasket Intake Manifold Gasket Sets
    Only $33.99

    Mopar Performance P5249643 - Mopar Performance Intake Manifold & Valley Tray Gasket Sets
    Only $19.99


    See All Items You Need