Edelbrock Rollin' Thunder Hydraulic Roller Camshaft Kit for 1987-Later Small Block Chevy 265-350
350-22096
Product Q&A
View Now
Small Block Chevy
Cam Notes: This camshaft works great when matched with Pro-Flo XT EFI system p/n 350-3528, and Performer RPM E-Tec cylinder heads p/n 350-60979; this combo produces 408 HP / 450 ft.-lbs. of torque. (Test on a 383 c.i.d.) Uses stock hydraulic roller lifters and pushrods.
)
|
| Operating Range | Idle-5500 RPM |
| Duration Advertised | 280° Intake/290° Exhaust |
| Duration @ .050'' | 212° Intake/222° Exhaust |
| Lift @ Valve | .462'' Intake/.479'' Exhaust |
| Lift @ Cam | .308'' Intake/.319'' Exhaust |
| Lobe Separation Angle | 112° |
| Intake Centerline | 107° |
| Intake Timing @ .050" | Open 1° BTDC Close 33° ABDC |
| Exhaust Timing @ .050" | Open 48° BBDC Close 6° ATDC |
Important Application Information:
Rollin Thunder Hydraulic Roller cams are for street high-performance and racing
applications only - not for heavy vehicles. Use with Edelbrock Performer RPM heads
(or other aftermarket heads), adjustable valvetrain components, screw-in studs, high performance adjustable rocker arms and at least 9.5:1 compression ratio. Headers,
high-energy ignitions, lower-than-stock rear gearing and a high-performance torque
converter (in auto. transmission equipped vehicles) are necessary.
INSTALLATION NOTES: Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7801.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.