FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2711 - Edelbrock Performer Manifolds for Olds

Edelbrock 2711 - Edelbrock Performer Manifolds for Olds

Edelbrock#350-2711

Performer Olds 350 Intake Manifold
  • Oldsmobile 307-403ci 1966-85
  • 4-bbl Spread-Bore Carb Flange
  • No Provision for EGR
  • Idle-5500 rpm
    50-state legal
    • Fits Applications:
    • 1977-1980
      BUICK
      1967-1971
      OLDSMOBILE
      1976-1985
      OLDSMOBILE
    • Click to see All

    Edelbrock 2711 - Edelbrock Performer Manifolds for Olds Details

    Oldsmobile 307-403ci V8

    Designed for street 307-330-350-403ci Oldsmobile V8s, 1966-85. For non-EGR applications, the 2711 manifold comes with a universal pad to fit most carburetors with electric chokes.For EGR applications, this intake manifold is a stock replacement/street legal part for 307, 350 and 403ci V8's with OEM 4-bbl carb; 1972-85; except 1976 with back pressure EGR's. 350 GM Corporate engines, 1981-86, use Performer intake manifold p/n 350-3701 for stock replacement. Will fit 1980-1/2 to 1985 307ci V8's with 5A heads (casting #3317).

    Installation Notes:

  • Port exit dimensions: 1.18'' x 1.86''
  • Manifold height: (A) 2.50'' , (B) 3.90''
    Click here to determine carburetor pad height.
  • Recommended Intake Gasket: JEGS p/n 555-210700
  • Edelbrock Performer Series carburetors and AFB carburetors will NOT fit this manifold.
  • for 403ci Pontiac Trans-Am, use OEM 4-bbl only (for shaker hood clearance).
  • Factory cruise control will not clear EGR valve without linkage alteration.
  • For EGR applications, use stock carb only.
  • HEI will clear this manifold.

    Carburetor Recommendations:
    OEM 4-bbl. carburetor

  • carb will work with EGR system
  • carb has provision for evaporative canister

  • Edelbrock 2711 - Edelbrock Performer Manifolds for Olds

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response. Most Performer intakes are 50-state legal, when used with the correct carburetor and in the correct application.

    Edelbrock 350-2711

    RPM Range
    Idle -5500
    Engine Make/Size
    Olds 307-403
    Number Of Carbs
    One
    Emission
    Without EGR
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15845 - JEGS Carburetor Stud Kits
    Only $12.99


    See All Items You Need