FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 27501 - Edelbrock Performer Manifolds for Ford

Edelbrock 27501 - Edelbrock Performer Manifolds for Ford

Edelbrock#350-27501

Performer 351-2V Cleveland Intake Manifold
  • Ford 351ci 2V Cleveland
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm
  • Polished Finish

    Edelbrock 27501 - Edelbrock Performer Manifolds for Ford Details

    Ford 351ci Cleveland V8

    Performer 351-2V intake manifold is designed for street 351C and accepts 4V carb, however it's designed to improve the performance of engines that came stock with 2V carb and heads. Will not fit Boss 302 or accept stock Motorcraft spread-bore carb. Valley width measures 6-31/32''.

    Installation Notes:

  • Port exit dimensions: 1.30'' x 1.86''
  • Manifold height: (A) 3.50'' , (B) 4.30''
    Click here to determine carburetor pad height.
  • Choke block-off plate included with Performer 351-2V intake manifold.
  • Recommended Intake Gaskets: JEGS p/n 555-210205

    Carburetor Recommendations:

    Edelbrock Performer 600cfm Carburetor p/n 350-1405,
    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805,
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • carb has manual choke only.
  • for auto trans. use throttle lever adapter p/n 350-1483.

    Edelbrock Performer 600cfm Carburetor p/n 350-1406,
    Edelbrock Performer 750cfm Carburetor p/n 350-1411.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483.

    Edelbrock Performer 800cfm Carburetor p/n 350-1413,
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483.

  • Edelbrock 27501 - Edelbrock Performer Manifolds for Ford

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-27501

    Engine Make/Size
    Ford 351 Cleveland
    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    Without EGR
    Usage
    Street/Hi-Performance
    Cylinder Head Type
    Cleveland 2V
    Position
    N/A
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    Edelbrock 1406 - Edelbrock Performer Carburetors
    Only $313.99

    Edelbrock 1405 - Edelbrock Performer Carburetors
    Only $292.99

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99


    See All Items You Need