2750K - Edelbrock Performer Manifolds for Ford

Edelbrock #350-2750K

Performer 351-2V Cleveland Intake Manifold w/Installation Kit

Ford 351ci 2V Cleveland

4-bbl Square-Bore Carb Flange (non-EGR)

Idle-5500 rpm

View In Catalog

More Details

Share |

2750K - Edelbrock Performer Manifolds for Ford

Idle-5500 RPM Power!

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response. Most Performer intakes are 50-state legal, when used with the correct carburetor and in the correct application.

2750K - Edelbrock Performer Manifolds for Ford Details

Ford 351ci Cleveland V8

This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs.

Performer 351-2V intake manifold is designed for street 351C and accepts 4V carb, however it's designed to improve the performance of engines that came stock with 2V carb and heads. Will not fit Boss 302 or accept stock Motorcraft spread-bore carb. Valley width measures 6-31/32''.

Installation Notes:

Port exit dimensions: 1.30'' x 1.86''

Manifold height: (A) 3.50'' , (B) 4.30''
Click here to determine carburetor pad height.

Choke block-off plate included with Performer 351-2V intake manifold.

Use Fel-Pro intake gasket p/n 375-1240.

Carburetor Recommendations:

Edelbrock Performer 600cfm Carburetor p/n 350-1405,
Edelbrock Performer 750cfm Carburetor p/n 350-1407
Edelbrock Performer 800cfm Carburetor p/n 350-1412
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805,
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483.

Edelbrock Performer 600cfm Carburetor p/n 350-1406,
Edelbrock Performer 750cfm Carburetor p/n 350-1411.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb acceptable to factory cruise control.

for auto trans. use throttle lever adapter p/n 350-1483.

Edelbrock Performer 800cfm Carburetor p/n 350-1413,
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit

carb acceptable to factory cruise control.

for auto trans. use throttle lever adapter p/n 350-1483.

Complete list of Edelbrock Performer Manifolds for Ford

Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.