Track OrderOrder Status & ReturnsHelpGift CardsHelpHelp CenterPhone1-800-345-4545
Logo
Cart0
$000
Made in USA
Pro-Flo XT Fuel Injection System SB-Chevy With Vortec Or E-Tec Heads
Product Discontinued
EDELBROCKPART NUMBER: 350-3528

Pro-Flo XT Fuel Injection System SB-Chevy With Vortec Or E-Tec Heads

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Items You Need

Blue RTV, Temperature Resistant up to 500 degrees [3 oz. Tube]

JEGS

Blue RTV, Temperature Resistant up to 500 degrees [3 oz. Tube]

Part Number : 555-28030
$799$8.99
You Save$1.00
Intake Manifold Gasket Set for Small Block Chevy 1985-1989 5.0L/5.7L TPI and 1996-2002 5.7L L31 Vortec Engines

JEGS

Intake Manifold Gasket Set for Small Block Chevy 1985-1989 5.0L/5.7L TPI and 1996-2002 5.7L L31 Vortec Engines

Part Number : 555-210003
$2559$28.99
You Save$3.40
Intake Manifold Bolt Kit Small Block Chevy Vortec

ARP

Intake Manifold Bolt Kit Small Block Chevy Vortec

Part Number : 070-434-2002
$2499
Intake Manifold Bolt Kit for Small Block Chevy Vortec Engines [Hex, 8740 Chromoly, Black Oxide]

ARP

Intake Manifold Bolt Kit for Small Block Chevy Vortec Engines [Hex, 8740 Chromoly, Black Oxide]

Part Number : 070-134-2002
$2399

Complete Systems: Chevy Small Block
    Pro-Flo XT Fuel Injection System
  • Small Block Chevy With Vortec Or E-Tec Heads
  • Up to 450 HP (29 lb/hr injectors)
  • Satin

    Installation Notes:
  • Manifold Dimensions: (A) 9.20", (B) 8.40", (C) 16.90', (D) 2.10'
  • Manifold not equipped with EGR.
  • Recommended intake gasket: Jegs p/n 555-210003
  • Satin Finish
    The Most Complete Fuel Injection System Available

    Pro-Flo XT EFI Intake Manifold
    Engineering at its finest, Pro-Flo XT intakes have a large plenum and long, tapered runners to deliver maximum horsepower and broad torque across a 1500-6500 RPM range. Choose between as-cast aluminum or black powdercoating. An LS-type front-mount 90mm throttle body feeds the intake all the air it needs (only included with complete systems).

    Pro-Flo XT: The Most Complete EFI System Available
    Ready-to-run bolt-on performance packages that include:

  • Intake manifold with fuel injectors, fuel rails, and throttle body
  • Preterminated 2-piece EFI harness
  • Engine control unit (ECU)
  • Narrowband O2 sensor
  • Handheld calibration module
  • Mallory distributor
  • Fuel pump, filter, and hose
  • Installation hardware
  • Pro-Flo XT software

    Complete Wiring Harness
    Unique 2-piece design offers quick connection of the engine and chassis harness at the bulkhead on the firewall for easy removal if needed.

    Flash-Programmable ECU
    Engineered by EFI Technology, a world leader in advanced electronic engine management, this control unit features flash-programmable memory and full-sequential injection (individual injector firing). Flash memory allows multiple tuning options, including Map-N (Speed Density) and Alpha-N (Speed Throttle). Map-N references RPM (engine speed) against MAP (manifold absolute pressure) to determine fuel and spark requirements; Alpha-N references RPM against throttle position. A base calibration is preloaded, and base calibrations for common performance engines are on the included CD (additional calibrations available at www.edelbrock.com). Create custom calibrations using Pro-Flo XT software. Closed loop fuel targets with included narrowband or optional wideband O2 controller are also supported.

    Handheld Calibration Module
    Edelbrock pioneered tuning on-the-fly fuel injection in 1995 with the original Pro-Flo that featured an exclusive handheld calibration module. Also included with the Pro-Flo XT, this unique module plugs into the ECU for fast access anytime. Save up to three calibrations. An easy-to-read display allows real-time adjustment of fuel, ignition, and RPM without a computer. Initial calibration, however, must be loaded with Pro-Flo XT software on a laptop or PC.

    Pro-Flo XT Software
    If laptop tuning is preferred, use Pro-Flo XT software for unlimited custom tuning and enhanced tuning resolution of fuel and spark maps. Tune, save, and restore as many custom calibrations as you want on your PC/laptop.

    Pro-Flo XT EFI System At-a-Glance
    New intake manifold design with late model LS-type 90mm throttle body
    2-piece EFI harness
    Flash-programmable ECU (no chip) has base calibration
    Requires use of PC and included AC adapter for first-time base calibration selection
    Full-sequential injection (individual injector firing)
    Map-N/Speed Density & Alpha-N/Speed Throttle tuning strategies for fuel & spark requirements
    Closed loop fuel control
    Accepts one narrowband or wideband O2 sensor
    Tune with handheld calibration module and store up to three base maps
    4x6 fuel and 3x6 spark tables on calibration module
    Real-time adjustments with module (or software once program has been saved/cycled for ECU)
    Tune with laptop and store unlimited calibrations
    11x16 load and RPM tables on laptop/PC
    4-wire stepper idle motor
    Adjustable rev limiter


    Click Here for Intake Manifold Dimensions

Part TypeFuel Injection System
Product LineEdelbrock Pro-Flo XT EFI Systems
BrandEDELBROCK
Package Height14.0
Package Width19.0
Package Length32.0
Weight45.0 PG
Part CategoryPerformance Parts
Cylinder Head TypeStandard
Engine Make/SizeChevy Small Block LS1
Vendor Part Number3528
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations
p65 warning