FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 3766 - Edelbrock Performer Manifolds for Ford

Edelbrock 3766 - Edelbrock Performer Manifolds for Ford

Edelbrock#350-3766

Performer 460 Intake Manifold
  • BB-Ford 429-460ci
  • 4-bbl Square-Bore Carb Flange (EGR)
  • Idle-5500 rpm
    • Fits Applications:
    • 1968-1987
      FORD
      1968-1972
      LINCOLN
      1969-1972
      MERCURY
    • Click to see All

    Edelbrock 3766 - Edelbrock Performer Manifolds for Ford Details

    Ford 429-460ci V8

    Designed for street 429/460ci Ford V8s. This intake manifold is for 460ci V8's with OEM 4V carburetor with electric choke; 1979-87. (Intake manifold p/n 350-2166 is for 429 & 460 V8s with OEM 4-bbl. carburetor with electric choke; 1968-72 (1973 non-CA); except stock equipped EGR.) Will not fit 429 Cobra-Jets or 1966-68 462ci Lincolns and will not accept stock spread-bore carb. This intake cannot use p/n 350-8714 to block-off EGR. Must use stock EGR plate. Will not fit 1988 and later models.

    Installation Notes:

  • Port exit dimensions: 1.65'' x 1.96''
  • Manifold height: (A) 3.75'' , (B) 4.45'' (same as stock)
    Click here to determine carburetor pad height.
  • use replacement EGR plate gasket p/n 350-3898.
  • Recommended Intake Gaskets: JEGS p/n 555-210306

    Carburetor Recommendations:

    OEM square-bore carburetor

  • carb will work with EGR system
  • carb has provision for evaporative canister
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • Ford EGR adapter needed
  • carb acceptable to factory cruise control

  • Edelbrock 3766 - Edelbrock Performer Manifolds for Ford

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-3766

    Engine Make/Size
    Ford 429-460
    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    With EGR
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 28030 - JEGS RTV Silicone Gasket Maker
    Only $5.99

    JEGS Performance Products 210306 - JEGS Intake Manifold Gaskets
    Only $21.99

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $4.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $5.99


    See All Items You Need