Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
Shop By Vehicle
Shop By
All Categories

Gift Certificates
My Account
E-Mail Signup
Catalog Request

Edelbrock 54861

Performer Buick V6 Intake Manifold Polished

Edelbrock 54861

Part Number: 350-54861

  • Buick 231/252ci Even Fire 1979-up
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 RPM Range
  • Polished Finish
  • $505.96
    Ships 11/03/16
    if Ordered Today
    Made In USA
    FREE Shipping
    Edelbrock 54861 Performer Buick V6 Intake Manifold Polished $505.96
    Edelbrock® Carburetor & Intake Rebate
    Expires on December 31, 2016

    Get a $25 Rebate Check with the purchase of an Edelbrock Carburetor or Edelbrock Intake Manifold! Purchase both and Receive a Check for $50

    View All Edelbrock Carburetors

    View All Edelbrock Intake Manifolds

    Edelbrock 54861 Details

    Buick 231-252ci V6

    Designed for 1979 and later street 231/252ci (252ci 1980-84 only) Buick V6 engines with late-model cylinder heads. Manifold will not fit pre-1979 engines. Manifold not equipped with EGR. Not compatible with C-3 and C-4 electronic fuel management systems.

    Installation Notes:
  • Port exit dimensions: .80'' x 1.85''
  • Manifold height: (A) 4.67'' , (B) 5.45'' (1.30'' taller than stock)
  • Carb Pad Height: 5.06" Click here to determine carburetor pad height.
  • Recommended intake gasket is Fel-Pro p/n 375-1200.

    Carburetor Recommendations:
  • OEM 4-bbl
  • Edelbrock Performer 500cfm Carburetor Electric Choke p/n 350-1403 , Manual Chock p/n 350-1404
  • Holley 390cfm Carburetor p/n 510-0-8007.
  • Must use square-bore to spread-bore carburetor adapter plate for Edelbrock and Holley p/n 350-2732.

  • Specifications:

    Engine Make/Size
    Buick 231-252
    RPM Range
    Idle -5500
    Number Of Carbs
    Without EGR
    Cylinder Head Type
    Without EGR
    Basic Operating RPM Range
    Carburetor Quantity
    Engine Block Style
    Stock/OEM standard deck
    Intake Finish
    Intake Material
    Intake Section Included
    Intake Style
    Dual plane
    Sold individually
    Manufacturer's Part Number:

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Items You Need
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.