Edelbrock Performer RPM Power Package 1955-86 Small Block Chevy 262-400 Includes:
350-7101PK
Product Q&A
View Now
Chevy 262-400ci Small Block V8
For 1955-86 Chevrolet 260-400 V8. Designed for maximum horsepower along with a broad torque curve for high-performance street/marine. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to add oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model waterneck, air-conditioning, alternator and HEI Will fit cast iron Chevrolet Bowtie heads but will not fit 1987 and later cast-iron heads. Will not fit under stock Corvette hood.
Installation Notes:){kind=link}
Camshaft Specs:
Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts.
Performer RPM, Performer RPM Hydraulic Roller and Torker-Plus cams are for street high-performance and racing applications only - not for heavy vehicles. Use with Edelbrock Performer RPM heads (or other aftermarket cylinder heads), adjustable valvetrain components, screw-in studs, high-performance adjustable rocker arms and at least 9.5:1 compression ratio. Headers, high-energy ignition, lower-than-stock rear gearing and a high-performance torque converter are necessary.
Note: Use only stock ratio rocker arms.
| Duration Advertised: | 308° Intake / 318° Exhaust |
| Duration @ .050'' Lift: | 234° Intake / 244° Exhaust |
| Valve Lift: | .488'' Intake / .510'' Exhaust |
| Lobe Separation Angle: | 112° |
| Open/Close @.050'' Cam Lift: | Intake - 10° BTDC (opens) / 44° ABDC (closes) Exhaust - 59° BBDC (opens) / 5° ATDC (closes) |
Specifications:
Wat this fit a 94 5.7 350 ?
does this fit the 267 4.4l v8?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.