FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 7193PK - Edelbrock Performer RPM Manifolds & Kits for Chrysler

Edelbrock 7193PK - Edelbrock Performer RPM Manifolds & Kits for Chrysler

Edelbrock#350-7193PK

Performer RPM 440 Power Package
Intake Manifold, Carburetor and Camshaft Kit
  • BB-Chrysler ''RB'' 413-440ci
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • 1500-6500 RPM Range

    Edelbrock 7193PK - Edelbrock Performer RPM Manifolds & Kits for Chrysler Details

    Chrysler 413-440ci ''RB'' Block V8

    Kit includes matching
    Performer Intake Manifold p/n 350-7193,
    Edelbrock Performer 750cfm Carburetor p/n 350-1407,
    Performer RPM Hydraulic Flat Tappet Camshaft & Lifters p/n 350-7194.

    Designed for 413-426-440ci Chrysler V8s that measure 8.75'' across block. Dual-plane design results in excellent low-rpm torque and outstanding high-rpm horsepower. Recommended for high-performance street and strip applications. Manifold is 1.7" taller than stock. Will not fit 1962-64 Max Wedge heads.

    Installation Notes:

  • Port exit dimensions: 1.13'' x 2.09''
  • Manifold height: (A) 4.90'' , (B) 5.80''; Carb pad height = 5.35'' Click here to determine carburetor pad height.
  • Recommended Intake Gasket: JEGS p/n 555-210500

    Carburetor Recommendations:
    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans
  • carb acceptable to factory cruise control.
  • carb has manual choke only.
  • use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

    Edelbrock Performer 800cfm Carburetor p/n 350-1413
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans
  • carb acceptable to factory cruise control.
  • use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

    Camshaft Specs:
    Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts.

    Performer RPM, Performer RPM Hydraulic Roller and Torker-Plus cams are for street high-performance and racing applications only - not for heavy vehicles. Use with Edelbrock Performer RPM heads (or other aftermarket cylinder heads), adjustable valvetrain components, screw-in studs, high-performance adjustable rocker arms and at least 9.5:1 compression ratio. Headers, high-energy ignition, lower-than-stock rear gearing and a high-performance torque converter are necessary.

    Note: Adjustable pushrods or rocker arms required. For 1968 and later applications.

    Duration Advertised:300° Intake / 308° Exhaust
    Duration @ .050'' Lift:238° Intake / 246° Exhaust
    Valve Lift:.480'' Intake / .495'' Exhaust
    Lobe Separation Angle:110°
    Open/Close @.050'' Cam Lift:Intake - 14° ATDC (opens) / 44° ABDC (closes)
    Exhaust - 58° BBDC (opens) / 8° BTDC (closes)

  • Edelbrock 7193PK - Edelbrock Performer RPM Manifolds & Kits for Chrysler

    1500-6500 RPM Power!

    For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.

    JEGS Performance Products 28060 - JEGS Engine Break-In/E.O.S. Lubricant
    Only $10.99

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69