Edelbrock 77169 - Edelbrock SB-Ford Heads
Edelbrock #350-77169Ford 289-351W Victor Jr. Aluminum Cylinder Head |
||||
|
||||
|
|
||||
Edelbrock 77169 - Edelbrock SB-Ford Heads Details
Ford 289-351W Victor Jr. Aluminum Cylinder Heads
The all-new Victor Jr. Ford heads have a 500+ horsepower potential, out-of-the-box, for an affordable, race-winning set-up. They feature large volume, high-flowing 210cc intake ports and .130'' raised 75cc exhaust ports. Designed to work with standard port location manifolds and headers, these heads have CNC gasket-matched port entries and exits with blended valve bowls. The spark plug holes and valves are in the stock location with a valve cover rail that¹s raised .150''. Complete heads come with stainless steel, 1-piece, swirl-polished, under-cut stem valve (2.05'' intake/1.60'' exhaust) as well as phosphor bronze valve guides. Note: Aftermarket 286/302 heads including Brodix, Edelbrock, Ford Motorsport and World Products with 1/2'' bolt hole diameters (block is 7/16'' bolt hole), except 397-M-6049-P303 (''P'' style head). Require 350-9680 inserts with 350-8552 head bolt or 350-9680 insert with 070-154-3601. If head studs are desired use 070-154-4005 (includes inserts). Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.
Performer & Performer RPM Heads for Street Legal and Street High-Performance Victor Jr. and Victor Series Heads
These street high-performance heads provide out of the box, bolt-on performance with no additional porting required. They offer improved power throughout the rpm range for great throttle response and top-end horsepower. The intake and exhaust runners are CNC-profiled for superior flow and performance. Standard port location allows the use of Edelbrock Performer, Performer RPM, Torker II and Victor Jr. intakes as well as others of a similar design. Stock location of the exhaust flange allows the use of stock exhaust or headers. Other features include hand blended intake and exhaust bowls and hardened interlocking valve seats for use with leaded or unleaded fuel. All Performer and Performer RPM heads are assembled with these high-quality components: stainless steel, 1-piece swirl-polished intake and exhaust valves with under-cut stems; 2-ring positive oil control seals; rocker studs; hardened steel guideplates; valve springs, retainers and keepers. In most cases, these heads are directly interchangeable with the factory heads.
Performer heads have provisions for all exhaust emissions related components and are street legal, while the Performer RPM heads are for non-emission vehicles.
Victor Jr. and Victor Series heads are designed for maximum horsepower. Victor Jr. heads are ideal for many types of competition and ultra-high performance street machines. Victor Series heads are one step above for even greater gains in horsepower. All these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports and specially contoured combustion chambers. Extra thick deck surfaces provide maximum head gasket retention with high-compression ratios. Use head bolt kit #350-8552 or 350-8553.
